Haier HLP23E User Manual (English)

Questions and Answers:

G
Gerald ThomasAug 12, 2025
Why is my Haier HLP23E Washer not washing, spinning, acting, and making abnormal sounds?
- D
  Deborah HicksAug 12, 2025
  Several issues could be at play. First, ensure there isn't a power failure and that the power plug is securely inserted. Also, check that the water level reaches the set level. If power is on, the plug is secure, and the water level is correct, make sure the top lid is closed and the laundries are placed in the machine in an orderly manner. Finally, confirm the machine isn't slanting, there are no metal materials inside, and the laundries aren't slanting during spinning; level the machine, fasten buttons/zippers, and reorder the laundries if needed.
D
donald42Aug 16, 2025
What to do if my Haier HLP23E Washer isn't filling with water or is filling slowly (E4 error)?
- E
  Elizabeth MorganAug 16, 2025
  If your Haier Washer isn't filling with water or is filling slowly and shows an 'E4' error, the water tap might not be open, the water inlet valve could be blocked, or the water pressure might be too low. Open the water tap and press the "Start/Pause" button. If that doesn't work, clean the water inlet valve and press "Start/Pause" again. If the water pressure is too low, wait until it returns to normal before using the washer.
J
Jared EllisAug 20, 2025
How to fix a Haier Washer that won't drain or drains slowly (E1 error)?
- L
  Lisa VanceAug 20, 2025
  If your Haier Washer isn't draining or is draining slowly and shows an 'E1' error, the drain hose may be blocked. Clean any foreign material from the drain hose. After cleaning, open and close the top lid once.
J
Judy FordAug 25, 2025
What does it mean when my Haier HLP23E Washer's safety switch actuates, it won't spin, and displays 'E3'?
- R
  rachelcoleAug 25, 2025
  If your Haier Washer's safety switch activates, it won't spin, and shows an 'E3' error, it could be due to the laundries being placed slantingly or the machine itself being on a slant. Re-order the laundries, close the top lid, and level the machine. After doing so, open and close the top lid once.
B
Brett BrooksAug 27, 2025
Why is my Haier Washer not filling with water?
- K
  Kathleen AndersonAug 28, 2025
  If your Haier Washer isn't filling with water, check if the power plug is loose, if the water faucet is turned on, and if the Power On/Off and Start/Pause buttons are pressed. Ensure the plug is firmly inserted, the water faucet is on, and both Power On/Off and Start/Pause are pressed.
K
Kathryn PinedaAug 31, 2025
What to do if my Haier HLP23E pauses during spin and shows 'E2'?
- D
  Daniel PottsAug 31, 2025
  If your Haier Washer pauses during the spin cycle and displays an 'E2' error, the top cover might be open. Close the top lid to resolve this issue.
K
Kristin HahnSep 4, 2025
Why won't my Haier HLP23E turn on (indicators are off)?
- M
  Michele TaylorSep 4, 2025
  If your Haier Washer won't turn on and the indicators are off, there might be a power failure or the power plug could be loose. Ensure the power is on and the power plug is tightly inserted.
J
Jessica WilliamsSep 7, 2025
Why does my Haier Washer buzz and display 'E0' when the reservation starts?
- K
  Kimberly MyersSep 8, 2025
  If your Haier Washer buzzes and shows an 'E0' error when the reservation starts, the top lid might not be closed properly. Make sure to close the top lid completely.

Haier HLP23E Specifications

General

Water consumption per cycle	- L
Energy consumption washing per cycle	- kWh
Annual energy consumption washing	350 kWh
Loading type	Top-load
Drum material	Stainless steel
Product color	White
Built-in display	Yes
Appliance placement	Freestanding
Drum capacity	- kg
Maximum spin speed	690 RPM
Number of washing programs	-