To Next PageTo Next PageHow to fix a Haier HLC1700AXW when the water will not drain?
If the water will not drain from your Haier Washer, it could be due to your drain hose setup. Ensure the drain hose support bracket is looped over a sink or into a standpipe that is between 2'6" and 3'3" high, and that the end of the hose is not immersed in water. Additionally, the button trap may be full, so check to see that the button trap is clean and dust free.
Why does my Haier HLC1700AXW Washer/Dryer wash/dry cycle not start?
If the wash/dry cycle on your Haier Washer/Dryer doesn't start, it could be because the door has not been closed properly. Close the door and try it again. Alternatively, the delay start may have been selected. Cancel the delay start.
What to do if there is water on the floor near my Haier HLC1700AXW Washer?
If there's water on the floor near your Haier Washer, the leakage could be due to an improperly connected drain or water hose. Check all connections to ensure they are secure. A clogged or slow-draining sink or standpipe can also cause this issue; in this case, check your plumbing or consult a professional plumber. Also, using the wrong detergent or too much detergent can lead to leaks. Make sure you are only using HE (High Efficiency) detergent.
What to do if there is water on the floor near my Haier HLC1700AXW/Dryer?
If you find water on the floor near your Haier Washer/Dryer, it could be due to a few reasons: * The water leakage could be caused by an improperly connected drain hose or water hose. Check all connections. * You may have a clogged or slow draining sink or standpipe. Check plumbing or consult a professional plumber. * You may have used incorrect or too much detergent. Make sure to use HE (High Efficiency) detergent only.
What to do if the door will not open after completion of a dry cycle on my Haier Washer/Dryer?
If the door won't open after a dry cycle on your Haier Washer/Dryer, the temperature inside may not have cooled down to a safe level. Wait for the inside temperature to cool down; this cooling time can take several minutes.
What to do if the wash/dry cycle does not start on my Haier HLC1700AXW Washer?
If the wash or dry cycle on your Haier Washer isn't starting, first ensure that the door is completely closed. If it still doesn't start, you may have accidentally selected the delay start function. If so, cancel the delay start and try again.
Why is my Haier Washer/Dryer making noise?
Your Haier Washer/Dryer may be making noise due to several reasons: 1. The drum was not unlocked correctly during installation. 2. Coins, loose change, buttons, or other heavy objects have been left in pockets. Ensure to empty pockets before loading the washer. 3. The support feet have not been adjusted. Check the correct levelling of the appliance. 4. The washer load may need to be re-balanced, as the load may be uneven. Evenly distribute clothing in the wash basket.
Why is my Haier Washer not taking in water?
Your Haier washer might not be taking in water for these reasons: * The water tap has not been opened. Open the water tap. * The faucet or valve may need to be open more fully. Ensure water hoses are not kinked, twisted, or tangled. * There is no water supply in the house or the water pressure is too low. Check another faucet in the house to make sure that household water pressure is adequate.
Why is my Haier dryer working but not drying the clothes?
If your Haier dryer is running but not drying clothes, it might be due to the following reasons: * The unit may be overloaded. The dryer drum should only be half full during the dry cycle to allow clothes to tumble. * The dryer load needs to be resorted. Heavy clothes may need to be separated from regular clothes. * Clothes dry unevenly and may need to be resorted.
Why do I have unsatisfactory washing results with my Haier HLC1700AXW Washer/Dryer?
If you're experiencing unsatisfactory washing results with your Haier Washer/Dryer, consider the following: * Clothes are too wrinkled: Avoid overloading and sort your load. Do not mix heavy clothes with light clothes. You may need to wash in warm or cold water. * Soap Residue: Check water temperature. Use less detergent. * Spots or stains on your clothes: Read the instructions on the detergent container and follow proper directions for using the softener. * Clothes are grayed or yellowed: You may have to add more detergent to the load. * Clothes are ripped and have holes/excessive water & tear: Remove small loose sharp objects prior to washing. Fasten belts, zippers, metal snaps etc. * Oversudsing or low cleaning performance: Must use HE Detergent.
Essential safety measures required during the installation process.
Detailed, step-by-step procedure for correctly installing the appliance.
Guidelines for selecting an appropriate and safe location for appliance placement.
Instructions for removing shipping bolts to ensure proper operation.
Proper methods and requirements for connecting the appliance's drain hose.
Guidelines for connecting hot and cold water supply hoses to the appliance.
Specifies the necessary voltage, frequency, and grounding for safe electrical connection.
Steps to ensure the appliance is correctly positioned and level for optimal performance.
An overview of the appliance's control panel and its various elements.
A structured guide to diagnose and resolve common appliance issues.
Explanations of error codes that may appear on the display and their meanings.
General
