POSITION AND LEVEL THE WASHER
IMPORTANT: Because the drum of this washer spins at very high speeds, up to
1,200 RPM, the washing machine must rest firmly on a solid surface
to minimize vibration, noise, and unwanted movement. This washer is
equipped with four adjustable feet to compensate for an uneven floor.
1. Move the washer into location and position it where it will be used.
2. Level the washer from side to side and front to back. Make sure that all four feet
are firmly in contact with the floor and the washer rests solidly in position.
3. Leveling feet can be adjusted by turning them clockwise to extend (raise the
washer) or counterclockwise to retract (lower the washer).
4. When the washer is level, use a wrench to securely tighten all four locknuts
against the bottom of the washer cabinet.
IMPORTANT: Do not replace height adjustable feet with casters.
14
Lock nut
ENGLISH
To Next Page
Loading...
Need help?
General
