INSTALLATION INSTRUCTIONS
INSTALLING YOUR COMBINATION WASHER / DRYER
We recommend that your new washer/dryer be installed by a qualified appliance
technician. If you feel that you have the skills to install the washer/dryer, please
read the installation instructions carefully before installing.
ENGLISH
Install the clothes dryer according to the manufacturer’s instructions
and local codes to reduce the risk of fire.
To reduce the risk of severe injury or death, follow all installation instructions.
WARNING
If, after completing these step, you are unsure that the washer/dryer is properly
installed, contact a qualified appliance technician.
WARNING
TOOLS NEEDED
You will need to have the following tools to help you in the installation of
your washer:
• Scissors
• Tape Measure
• Standard Screwdriver
• Gloves
PARTS SUPPLIED
Water Hoses (2)
(Flat washers are pre-
installed)
Wrench
(Used to tighten
locknuts and remove
transportation bolts)
Drain Hose
(Support Bracket)
• Pliers
• Level
• Wrench
SAVE THESE INSTRUCTIONS
IMPORTANT: If your washer was just delivered and the outside temperature
was below freezing, do not operate until the washer warms up to room
temperature.
Fire Hazard
7
ENGLISH
To Next Page
Loading...
