EasyManuals Logo

Haier HPAC9M User Manual

Haier HPAC9M
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Operation
1. Wait 20 minutes before starting the unti to assure that the coolant has leveled off.
2. Wait 3 minutes before restarting the unit after a normal shutdown so as to complete
the compressor cycle.
3. Use an 115 volt 20 amp outlet for the air conditioner. Do not use any other electrical appliances
on this line or you may trip the fuse. Dedicate the electric line for the air conditioner alone.
4. Do not place the air conditioner in direct sunlight or close to any heating appliances.
eg. baseboard heaters, stoves, etc.
5. Operate the unit on a flat surface only.
6. Check the filter at least once a month in order to acheive highest cooling efficiency.
7. If the unit is not being used for a long period of time, please remove the plug to drain pipe and
drain out any condensed water.
Product Specification
Voltage and Frequency 115V / 60Hz
Input Power 750 W
Cooling Capacity 9000 BTU
Moisture Removal (pints/hr) 1.31/hr
Coolant R22
Timer 8 Hours
Operating Temperature Range 64.4˚F - 95˚F
Unit Dimensions (WxDxH) (inches) 20 1/4 x 13 13/32 x 29 13/16
Net Weight lbs. approximate 71.5 lbs.
(7)
English

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Haier HPAC9M and is the answer not in the manual?

Haier HPAC9M Specifications

General IconGeneral
BrandHaier
ModelHPAC9M
CategoryAir Conditioner
LanguageEnglish

Related product manuals