How to turn off the 'Ice Full' indicator light on a Haier HPIM26S?
The “Ice Full” indicator light is on because the ice basket is full. Remove ice from the ice storage basket to make more space.
What to do if both 'Ice Full' and 'Add Water' lights are on in my Haier HPIM26S Ice Maker?
This can be due to an electrical power surge, air in the lines, blocked lines, or the water tank not detecting the water level. Try the following: 1. Turn off the ice maker and unplug it. 2. If needed, fill it with water, replace the plug, and restart the unit. 3. Inspect relative parts and remove the drain cap on the back of the unit to drain a small amount of water. Replace the drain cap and try using the unit again. 4. Check if ice is blocking the ice pusher. Turn off the unit, let the ice melt, and restart.
What to do if my Haier Ice Maker does not operate?
First, ensure the unit is plugged into a standard 110/120 Volt, 60 Hertz power source. Also, the ambient or water temperature might be too high. Try running the ice maker in temperatures below 90°F and/or pour colder water into the water reservoir.
Why does the 'ADD WATER' light turn on in my Haier Ice Maker?
The “ADD WATER” indicator light turns on because of a low water level or a lack of water. To solve this, add water, and the ice maker will operate automatically.
How to fix an ice blockage in my Haier HPIM26S Ice Maker if no ice is being made?
Ice blockage occurs when making ice takes too much time. Turn off the machine and restart it after the ice block melts. Alternatively, change the size selector to small ice cubes.
Why is there no display on my Haier Ice Maker's control panel?
The lack of display might be due to the plug being disconnected. Check that the plug is properly plugged into the electrical outlet.
Details electrical specifications, grounding requirements, and safe use of extension cords for the appliance.
Important steps to follow before operating the icemaker, including positioning and initial setup.
Outlines what is covered by the warranty, including labor and parts, and for how long.
Specifies what is not covered by the warranty, such as misuse, shipping damage, and consequential damages.
Explains the process for repairs or replacements under the limited warranty terms.
To Next Page
General
