How to fix a buzzing noise from the compressor of my Haier HPIM35W Ice Maker?
If the compressor is making a buzzing noise when the machine is on, the voltage may be lower than required. Turn off the icemaker, ensure the voltage is 120v, and then restart it.
What to do if the Haier HPIM35W LCD display shows “FULL”?
If the LCD display shows “FULL”, it could be due to two reasons. First, there might be too much ice in the ice storage basket, in which case you should remove some ice. Second, the temperature might be too low; try placing the icemaker in a warmer location.
What to do if the Haier Ice Maker LCD display shows “POUR”?
If the LCD display shows “POUR”, it indicates that there is no water in the water storage tank or the water level is too low. Refill the water storage tank with water and restart the unit. Alternatively, the filter might be blocked; clean it with a soft, flexible toothbrush.
Why are the ice cubes fusing together in my Haier HPIM35W Ice Maker?
Ice cubes may fuse together if the ice-making time is too long. Stop the machine, reset the ice-making time, and restart it after the ice block melts. Also, the water temperature in the inner liner might be too low. Replace the water in the inner liner; the suggested water temperature is 44.6° to 77°F.
What to do if there is no display on the LCD screen of my Haier HPIM35W?
If there is no display on the LCD screen, the fuse may be blown. Replace the fuse.
Explains the polarized plug feature and its safety purpose for reducing electric shock risk.
Details essential steps to follow before the first use of the icemaker.
General| Daily Ice Production | 35 lbs |
|---|---|
| Ice Shape | Bullet |
| Ice Storage Capacity | 2.2 lbs |
| Ice Cube Size Options | Small, Medium, Large |
| Voltage | 115V |
| Type | Portable |
To Next Page
