English
7
Power Control
The power control turns the unit on and off.
When you press power control, the unit begins to
operate. Its operation mode is auto and fan
speed is auto.
Warning Light
Condensed water may accumulate in the unit.
If the internal tank becomes full, the Warning
Light will shine and the unit will not operate until
the unit has been drained.
Operating mode indicator
Indicator color of operating mode and LED :
When cooling mode is selected, the indicator
light will be blue.
When dehumidify mode is selected, indicator
light will be yellow.
When fan mode is selected, indicator light will
be green.
When auto mode is selected, indicator light will
be based on the operating mode.
Temp. and Time Setting Indicator
• During operation, the unit displays “present
room temperature.”
• When setting temperature, the unit will display
set temperature.
• When setting the time it displays “set time” and
indicator flashes.
• 5 seconds after "set temperature" and "set
time", it goes back to "present room tempera-
ture".
• Temperature display ranges from 64˚F to 89˚F.
• When environmental temperature is higher
than the temperature display range, the display
shows "HI".
• When environmental temperature is lower than
the temperature display range, the display
shows "LO".
• When the unit stops operating, indicator light
goes off.
Operation
Control Panel
Mode Light
After switching the air conditioner off, you must wait 3 minutes before switching it back on again.
To Next Page
Loading...
