Haier HRF-663ATA2 Series User Manual

Removing and installing the ice cube container
Removing the ice cube container
Press the middle section of the ice cube container in and pull it off its shelf.
Re-placing the ice cube container
Slide the ice cube container in the channel on both sides of the inner sleeve until it is clasped
into position.
If the ice cube container cannot be fit into position, take it out again, rotate the support by
90°, and then re-insert the container so that the clamp locks with the channel.
Turn
Support
28

Haier HRF-663ATA2 Series Specifications

General

Brand	Haier
Model	HRF-663ATA2 Series
Category	Refrigerator
Language	English