Gently spread two cards fixing the
defrosting heater strip, as shown in the
red circle in Fig. ②. Pull the defrosting
heater strip through the right fixing
card;
②Pull out the defrosting heater strip
through the left fixing card.
③ The left terminal is defrosting,
heating wire and fuse wire, and the
right terminal is defrosting sensor.
Before connecting the appliance to the power supply you should check, whether the door swing must
change from right (as delivered) to left, if this is required by the installation location and the usability.
Before connecting the appliance to the power supply you should check, whether the door swing must
change from right (as delivered) to left, if this is required by the installation location and the usability.
To Next Page
Loading...
Need help?
General
