Water dispenser
(Only models with water dispenser)
With the water dispenser cool drinking water can be tapped.
The water think should be cleaned before first use (see CARE ANDCLEANING).
Filling the water tank
1.Ensure that the water tank is properly inserted (see EQUIPMENT)
2. Rotate and lift the round lid (A) and fill the water tank
up with fresh drinking water.
3.Fill water only up to the mark (1.8L): as it could overflow
When the door opens and closes.
4.Close the round lid until it clicks into place.
Before refilling dispose residual water and clean the water tank.
When you don’t need water for a long time, please empty the water tank and insert the
cleaned tank.
The cover(C) on the water tank is additionally used to save energy. If you do not want to get
water from the water dispenser for a long period, please still install the cover because of
better insulating and saving energy.
Getting water from the dispenser
1. Place a glass underneath the water outlet.
2. Push it gently against the water dispenser lever with
your glass,
Make sure the glass is in line with dispenser to prevent the
water from splashing out.
Removable water tank
(Only models with water dispenser)
The water tank can be removed and reinstalled for cleaning
in the same way as the door racks.
Insert water tank
(Only models with water dispenser)
Place the water tank in the position that water out-let (B)
fits into the opening of the door. Make sure that the water
tank is locked.
To Next Page
Loading...
