Reinstallation: (see fig. # 3 and # 4)
1. As shown in fig. 3, dismantle the lower hinge and plastic pad from
right side and then install them on the left side.
2. As shown in fig. 4, install the top hinge and pad to the left side.
3. Install refrigerator door: make the left bottom hole of the refrigerator
compartment door fall over the lower hinge axle, move back and
forward the door to make it straight and in alignment with top hinge.
Install the top hinge again, turn the hinge axle until it
completely enters the door body, then fix it with screws.
4. Replace the hinge cover as shown in Fig. 4.
fig. # 3
fig. # 4
9
English English
To Next Page
Loading...
