Handle installation of refrigerator door:
1. Take out door handle, screws and screw covers from refrigerator
accessory bag.
2. Align the upper part of door handle with the screw hole of the upper
side of refrigerator door, and fix with screw.
3. Align the lower screw hole of the door handle with the hole in the
refrigerator door, fix with screw, and cover it with a
screw cover.
1. Remove hinge cover screw.
2. Remove the top hinge cover.
3. Loosen the top hinge screws using a phillips head screwdriver.
4. Adjust the door or put a spacer in between and then tighten the screws.
5. Replace the top hinge cover.
Door Alignment
(see fig. # 2)
fig. # 1
Door Handle Installation
7
English English
To Next Page
Loading...
Need help?
General
