To Next PageTo Next PageWhy is my Haier HSU-10TSV13-SC not cooling well?
Several factors can impact the cooling performance of your Haier Air Conditioner. Check for obstructions blocking the inlet and outlet. Ensure the temperature is set correctly. Close any open doors or windows. During cooling operation, use curtains to block direct sunlight. Also, consider if there are too many heat sources or people in the room.
Why won't my Haier Air Conditioner restart immediately?
When the unit is stopped, it won't restart immediately for about 3 minutes to protect the system. Similarly, if the electric plug is pulled out and reinserted, a protection circuit will activate for 3 minutes.
What to do if my Haier HSU-10TSV13-SC is making noise during operation?
A swishing or gurgling noise could be refrigerant flowing within the system, especially noticeable in the first few minutes after starting. A cracking noise might be the casing expanding or shrinking due to temperature changes, which is normal. If there's a loud airflow noise, the air filter may be dirty.
Why does my Haier HSU-10TSV13-SC Air Conditioner smell during operation?
The air conditioner might be circulating smells from the room, such as odors from furniture, paint, or cigarettes.
Why is mist coming out of my Haier HSU-10TSV13-SC?
During COOL or DRY operation, the indoor unit may blow out mist. This is due to the rapid cooling of the indoor air.
General| Technology | Inverter |
|---|---|
| Outdoor Noise Level | 50 dB |
| Compressor Type | Rotary |
| Power Supply Frequency | 50 Hz |
| Noise Level (Outdoor) | 50 dB |
| Net Weight (Indoor Unit) | 9 kg |
| Type | Split |
| Power Supply | 220-240V |
| Refrigerant | R22 |
| Refrigerant Type | R22 |
Identification of key parts of the indoor unit.
Detailed description of the remote control's buttons and displays.
Step-by-step guide for inserting batteries into the remote control.
How to start the unit, select cooling or dry modes, and set temperature.
Procedures for emergency running and test operation by service personnel.
Adjusting vertical and horizontal airflow direction using the remote.
How to activate and use the sleep mode for comfortable temperature control.
Using Turbo for fast cooling and Quiet for low noise operation.
Using Nano Aqua Ionizer and UV Sterilization functions for air quality.
Engaging energy-saving modes (L1, L2, L3) for reduced power consumption.
Setting timers and adjusting healthy airflow for comfort.
Using self-clean for hygiene and I FEEL for remote temperature sensing.
Overview of the Wi-Fi system architecture and app control for smart management.
Instructions on how to clean the air filters for optimal performance and longevity.
Guide for replacing or attaching optional air purifying filters to the unit.
Critical warnings regarding proper installation and electrical connections.
Precautions for safe operation, water usage, and environmental factors.
Diagnosing normal performance phenomena like noise and startup delays.
Addressing issues such as poor cooling, smells, mist, and air filter status.
Explanation of warning symbols, temperature limits, and UV-C lamp safety.
