Haier HSU-22HVA103/R2(DB) User Manual

Cool Operation
2.Select operation mode
Press FAN button. For each press, fan speed changes as
follows:
Press MODE button. For each press, operation mode
changes as follows:
Remote controller:
Remote controller:
Then Select COOL operation
Press TEMP. button
Every time the button is pressed, temp.setting
increase 1
o
C,if kept depressed, it will increase
rapidly
Every time the button is pressed, temp.setting
decrease 1
o
C,if kept depressed, it will decrease
rapidly
Select a desired temperature.
4.Fan speed selection
3.Select temp.setting
5.Unit stop
Air conditioner is running under displayed fan speed.
When FAN is set to AUTO, the air conditioner
automatically adjusts the fan speed according to room
temperature.
Press ON/OFF button, the unit stops.
AUTO
LOW
MED
HI
AUTO
COOL DRY FAN HEAT
1. Unit start
Press ON/OFF on the remote controller, unit starts.
Operation
58
POWER/SOFT
On the displaying board,colorful displaying bar will be blue.
Remote controller
Domestic Air Conditioner
HSU-18,22HVA103/R2(DB) System Configuration

Haier HSU-22HVA103/R2(DB) Specifications

General

Brand	Haier
Model	HSU-22HVA103/R2(DB)
Category	Air Conditioner
Language	English