Why is my Haier HSU-24HEA03 Air Conditioner not cooling well?
Several factors can cause poor cooling. Check if the air filter is dirty and clean it, normally every 15 days. Ensure there are no obstructions blocking the inlet and outlet. Verify that the temperature is set correctly. Make sure all doors and windows are closed. Block any direct sunlight with curtains. Reduce heat sources or the number of people in the room during cooling.
Why is my Haier HSU-24HEA03 cooling poorly?
Poor cooling in your Haier Air Conditioner can stem from several factors. First, ensure the air filter is clean; it should ideally be cleaned every 15 days. Check for any obstructions blocking the air inlet and outlet. Verify that the temperature is set correctly. Also, make sure all doors and windows are closed. If direct sunlight streams in, use curtains to block it. Finally, consider if there are excessive heat sources or too many people in the room.
Why can't I change the fan speed in dry mode on my Haier HSU-24HEA03?
In DRY mode, when the room temperature drops below the set temperature +2°C, the unit will run intermittently at LOW speed regardless of the FAN setting.
How to fix a Haier Air Conditioner that does not restart immediately?
If your Haier Air Conditioner doesn't restart immediately after being stopped, it's because the system needs to protect itself. There is a 3-minute delay to protect the system. If you unplug and replug the unit, this protection circuit will also activate for 3 minutes.
Why does my Haier HSU-24HEA03 make so much noise?
Several factors can cause unusual noises. During operation, a swishing or gurgling noise might be heard due to refrigerant flowing; this is more noticeable in the first few minutes after starting. A cracking noise can occur as the casing expands or shrinks with temperature changes. Also, a big noise from airflow might indicate a dirty air filter.
Why does my Haier HSU-24HEA03 Air Conditioner smell?
The smells generated from your Haier Air Conditioner are due to the system circulating odors from the indoor environment, such as furniture, paint, or cigarette smoke.
What is that noise coming from my Haier Air Conditioner?
The swishing, gurgling, or cracking noises you hear from your Haier Air Conditioner are normal. The swishing or gurgling sound is refrigerant flowing through the system, most noticeable in the first few minutes of operation. The cracking noise comes from the casing expanding or contracting due to temperature fluctuations. However, a significant noise from airflow could indicate a dirty air filter.
Why can’t I change the fan speed in dry mode on my Haier Air Conditioner?
In DRY mode on your Haier Air Conditioner, the fan speed cannot be changed because when the room temperature drops below the set temperature plus 2 degrees Celsius, the unit will run intermittently at LOW speed, regardless of the fan setting.
General| Type | Split Air Conditioner |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Compressor Type | Rotary |
| Refrigerant | R410A |
| Cooling Capacity | 24000 BTU/h |
| Operating Temperature (Cooling) | 18°C to 43°C |
Proper disposal methods for old air conditioners, emphasizing refrigerant handling and recycling.
Guidelines for environmentally friendly disposal of air conditioner packaging materials.
Crucial safety guidelines and warnings for assembly, operation, and maintenance of the air conditioner.
Technical specifications including ambient temperature ranges for cooling and heating operations.
Warnings and cautions related to the installation process to prevent accidents and damage.
Warnings regarding power supply, cord usage, object insertion, and self-repair to ensure safe operation.
Cautions about using the unit for specific purposes, placement near heat sources, and interaction with children/pets.
Identifies and describes the parts of the indoor air conditioner unit.
Identifies and describes the components of the outdoor air conditioner unit.
Details the buttons and functions of the air conditioner's remote controller.
Explains the various displays and icons on the remote controller's LCD screen.
Step-by-step guide on how to set the clock on the remote controller.
Instructions on remote controller usage, signal transmission, and battery loading/replacement.
Explains how to use the health operation mode and its anion function for air purification.
Guides on setting up and using the auto operation mode for automatic temperature and fan speed control.
Instructions on selecting and using the cool operation mode, including temperature and fan speed settings.
Details on how to operate the air conditioner in dry mode for dehumidification.
Explains the fan-only operation mode and its limitations.
Instructions for using the heat operation mode, including temperature and fan speed settings.
How to adjust the vertical flap for controlling air flow direction in different modes.
Guide to activating and using the sleep mode for comfortable night-time operation.
Instructions for setting timer functions to turn the unit on or off automatically.
Details on confirming timer settings and how to cancel timer operations.
Explains the power operation for rapid cooling/heating and soft operation for quietness.
How to set and use the health airflow function for optimized air circulation.
Procedures for using emergency operation and test operation modes.
Advice on setting temperature, closing doors, using timers, and louvers for efficient use.
Guidelines on cleaning the remote controller and indoor unit, including what not to use.
Step-by-step instructions for replacing the air purifying filter in the indoor unit.
Common issues like no restart, noise, smells, or mist, with their causes and checks.
Addresses problems like poor cooling, fan speed issues, and checks for power, filter, and obstacles.
To Next Page