EasyManua.ls Logo

Haier HSU12VHG-B - User Manual

Haier HSU12VHG-B
98 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Order No. AC1S00V0
Wall mounted Type
Model No.HSU12HG(DB)
outdoor unit
indoor unit and remote controller
Haier Group
SERVICE MANUAL
DC Inverter EK-Series
201
(.
(.
(.

Table of Contents

Questions and Answers

  • D
    daviskatherineAug 12, 2025
    Why is my Haier Air Conditioner cooling poorly?
    • M
      Michael VazquezAug 12, 2025
      Poor cooling in your Haier Air Conditioner can stem from several factors. Check if the air filter is dirty and clean it, ideally every 14 days. Ensure there are no obstructions blocking the inlet and outlet. Verify that the temperature is set correctly. Make sure all doors and windows are closed. Reduce direct sunlight by using curtains. Finally, consider whether there are too many heat sources or people in the room.
  • K
    Kenneth WatsonAug 16, 2025
    Why does my Haier Air Conditioner not restart immediately?
    • A
      Ann RomeroAug 16, 2025
      If your Haier Air Conditioner doesn't restart immediately after being stopped, it's due to a built-in protection mechanism. The unit is designed to wait for 3 minutes before restarting to protect the system. This also applies if the electric plug is pulled out and reinserted; the protection circuit will activate for 3 minutes.
  • R
    Roberta CastilloAug 20, 2025
    How to change fan speed in dry mode on Haier Air Conditioner?
    • H
      harristinaAug 20, 2025
      In DRY mode, the fan speed of your Haier Air Conditioner cannot be manually adjusted. When the room temperature drops below the set temperature +2°C, the unit will run intermittently at LOW speed, regardless of the fan setting.
  • D
    Debbie LambAug 23, 2025
    Why is my Haier HSU12VHG-B making noise?
    • K
      Kelsey LittleAug 25, 2025
      The swishing or gurgling noise you hear during or after operating your Haier Air Conditioner is the sound of refrigerant flowing through the system. It’s more noticeable in the first 2-3 minutes after starting the unit. However, a big noise from airflow during operation might indicate that the air filter is too dirty.
  • A
    Andrea ClarkAug 27, 2025
    Why is my Haier Inverter cooling poorly?
    • A
      Ann GarciaAug 28, 2025
      Poor cooling in your Haier Inverter could stem from several factors. Check if the air filter is dirty and clean it every 15 days. Ensure there are no obstructions blocking the inlet and outlet. Verify that the temperature is set correctly and that all doors and windows are closed. Also, consider whether direct sunlight is entering through the window (use curtains) or if there are excessive heat sources or too many people in the room.
  • W
    William KimAug 31, 2025
    Why does my Haier Inverter make noise?
    • J
      Julia TaylorAug 31, 2025
      The swishing or gurgling noise you hear during or after your Haier Inverter's operation is the sound of refrigerant flowing through the system. The cracking noise during operation is caused by the casing expanding or shrinking due to temperature changes. A big noise from air flow can mean that the air filter is too dirty.
  • N
    Nicholas PowellSep 4, 2025
    Why does my Haier Inverter generate smells?
    • M
      Maria CunninghamSep 4, 2025
      The smells from your Haier Inverter are due to the system circulating odors from the interior air, such as those from furniture, paint, or cigarettes.
  • J
    John MartinezSep 7, 2025
    Why can’t I change the fan speed in dry mode on my Haier Inverter?
    • A
      April HamiltonSep 7, 2025
      When your Haier Inverter is in DRY mode, the fan speed cannot be changed. When the room temperature drops below the set temperature plus 2 degrees Celsius, the unit will run intermittently at LOW speed, regardless of the fan setting.

Haier HSU12VHG-B Specifications

General IconGeneral
RefrigerantR32
Compressor TypeRotary
Power Supply220-240V, 50Hz
TypeSplit
InverterYes
Cooling Capacity3.5 kW

Related product manuals