Use
EN
MyZone drawer
The fridge compartment is equipped with a MyZone drawer. In accordance with the food’s
storage demands, the most suitable function can be selected to get the optimal nutritional
value of the foods Following functions are available:
1) Function Cheese
The appliance provides the chamber for precious food with mild and dry fresh air via intel-
ligent control, avoiding the damp and mustiness to e ectively preserve the nutrition of
the food for a long time. This function is suitable to store dry food with low water content
like tea, co ee, dried fruit etc.
2) Function Fruits & Veg
This function is suitable to store fruits and vegetables like apples and carrots.
Notice: 0 °C Fresh
Due to di erent water contents of meat, some meat with more moisture will be
frozen at temperatures lower than 0 °C. So “immediately cut” meat should be stored in
DryZone drawer, with temperatures min. 0°C.
3) Function 0 °C Fresh
This function sets the temperature in the MyZone drawer to 0 °C. Suitable to store of fresh food
such as meat, sh, mussels or instant products. Most foods stay fresh at 0 ° C, but not frozen.
Notice: Fruits & Veg function
Cold-sensitive fruits like pineapple, avocado, bananas, grapefruits and vegetables such
as potatoes, aubergines, beans, cucumbers, zucchini and tomatoes and cheese should
not be stored in the MyZone drawer .
20
No tice
The My Zone Function will automatically switch off after 2.5 hours.The appliance is
then operated at the previously set temperature.
Quick-Cool function
Fresh food should be cooled as quickly as possible to the core
control, avoiding the damp and mustiness to effectively preserve
the nutrition of the food for a long time.When the greenhouse is
set as the function of quick-cool, the greenhouse gear is
automatically lowered by 2 gear, except for -19 gear and -20 gear.
1.
Unlock the panel by pressing button “G” if it is locked.
2.
Touch key “B” (My Zone) for 3 seconds.
3.
Indicator “b1”illuminates and the function is activated.
By repeating the above steps or selecting an other function this
function can be switched off again.