Haier HTF-508DGS7 - Installation Guide; Unpacking and Environmental Setup; Space, Ventilation, and Alignment

EN
Installation
31
Unpacking
▶ Take the appliance out of the packaging.
▶ Remove all packaging materials.
Environmental conditions
The room temperature should always be between 10° C and 43° C, since it can inuence
the temperature inside the appliance and its energy consumption. Do not install the appli-
ance near other heat-emitting appliances (ovens, refrigerators) without isolation.
Space requirement
Required space when door is opened:
D1= 600
D2= 885
D3= 1034
D4= 50
W1= 830
W2= 1424
Ventilaton cross-section
To achieve sucient ventilation of the appliance for
safety reasons, the information of the required ventila-
tion cross sections must be observed.
Aligning the appliance
The appliance should be placed on a at and solid sur-
face.
1. Tilt the appliance slightly backwards.
2. Set the feet to the desired level.
Make sure the distance to the wall on the hinge side is
at least 100 mm for the door to open properly. z
WARNING!
▶ The appliance is heavy. Always handle with at least two persons.
▶ Keep all packaging materials out of children´s reach and dispose them in an environ-
mentally friendly manner.
D1
D2
D3
D4
D4
W1
W2
10 cm
10 cm
10 cm
10 cm
1.
max 45°
2.