• Make sure the appliance is properly ventilated (see INSTALLATION).
• Do not install the appliance in direct sunlight or near the heat sources (eg.
stoves, heaters).
• Avoid unnecessarily low temperature in the appliance. The energy
consumption increases with the decreasing of the setting temperature in the
appliance.
• Functions like SUPER FREEZE consume more energy.
• Allow warm food to cool down before placing it in the appliance.
• Open the appliance door as little and briefly as possible.
• Do not overfill the appliance to avoid obstructing the air flow.
• Avoid air within the food packaging.
• Keep door seals clean so that the door always closes correctly.
• Defroze frozen food in the fridge storage compartment or use the D-Frost
function in the My Zone box.
• The most energy-saving configuration requires drawer, food box and shelves
to be positioned in the appliance in a factory-fresh condition, and food to be
placed without blocking the air outlet of the duct.
To Next Page
Loading...
