WATER INLET VALVE AND INLET VALVE FILTER
To prevent blockage to the water supply by ingress of foreign substances, clean the water inlet valve
and inlet valve fi lter regularly.
MOVING THE MACHINE
If the machine is to be moved to a distant location, replace the
transportation bolts removed before installation to prevent damage as
shown below.
Remove the blanking plugs.1.
Remove the back cover2.
Insert the synthetic stabilisers and the transportation bolts.3.
Tighten the bolts with a spanner.4.
Replace the back cover.5.
LONG PERIODS OF DISUSE
If the washing machine is left idle for a long period, pull out the electrical plug and turn off the water
supply. Open the washer door to prevent formation of moisture and odours. Let the door open while
not used.
17
C
。
90
C
。
60
C
。
40
C
。
40
C
。
30
2.
4.
5.
1.
3.
To Next Page
Loading...
Need help?
General
