To Next Page
J
Jeffery PaulAug 15, 2025
Why is my Haier Washer not spinning?
- AAnthony ClarkAug 15, 2025
If your Haier Washer isn't spinning, check the machine load and laundry and run a spinning programme again.
Why is my Haier Washer not spinning?
If your Haier Washer isn't spinning, check the machine load and laundry and run a spinning programme again.
Why is my Haier HW90 leaving washing powder residues on the laundry?
Washing powder residues can appear as white spots on your laundry due to insoluble particles of detergent. You can perform an extra rinse to resolve this. Also, you can try to brush the points from the dry laundry or choose another detergent.
What to do if my Haier HW90 Washer washing result is not satisfactory?
If you are not satisfied with the washing result of your Haier Washer, consider the following: * Select another program if the degree of pollution does not agree with the selected program. * Choose the detergent according to the degree of pollution and the manufacturer's recommendations if the detergent quantity was not sufficient. * Reduce loading if the maximum load has been exceeded. * Loose the laundry if it was unevenly distributed in the drum.
How to fix CLR FLTR error on my Haier HW90 Washer?
The CLR FLTR error on your Haier Washer indicates a drainage problem where water isn't fully drained within 6 minutes. Check the drain hose installation.
General| Capacity | 9 kg |
|---|---|
| Spin speed | 1400 rpm |
| Child Lock | Yes |
| Loading type | Front |
| Energy Rating | A+++ |
| Delay Start | Yes |
Essential pre-operation checks and handling precautions for user safety.
Guidelines for safe operation of the appliance during regular daily use.
Instructions for safe cleaning and routine maintenance of the appliance.
Critical safety guidelines for correctly installing the washing machine.
Specifies the appliance's purpose and limitations to ensure safe and proper operation.
Visual identification of appliance parts and components for user reference.
Lists and identifies the various accessories included with the washing machine.
Details on operating the power button to switch the appliance on and off.
Explanation of how to use the programme selector knob to choose wash cycles.
Information displayed on the control panel, including time, symbols, and error codes.
Explains the purpose and operation of various function buttons for customizing wash cycles.
How to activate and deactivate the child lock feature for safety.
Describes the compartments of the detergent drawer and their usage.
Explanation of the auto-weight function that adjusts settings for load size.
Instructions for connecting the washing machine to the electrical power supply.
Steps for correctly connecting the appliance to the water supply.
Guidance on sorting and preparing clothes for washing.
Recommendations on choosing the right detergent type and quantity for different programmes.
Step-by-step guide on adding detergent and other washing agents to the correct compartments.
Process for selecting the appropriate wash programme based on fabric type and soiling.
Instructions for starting, interrupting, cancelling, and completing wash cycles.
Steps to take after the wash cycle finishes, including removing laundry and disconnecting power.
Instructions for obtaining and setting up the Haier Smart mobile application.
Steps for creating an account and logging into the Haier Smart APP.
Overview of the app's capabilities, including equipment control and status viewing.
Tips for sustainable and eco-conscious operation of the washing machine.
How to clean the detergent drawer to prevent residue buildup.
Guide to cleaning the exterior and rubber components of the washing machine.
Steps for cleaning the water inlet valve filter to prevent blockages.
Methods for cleaning the washing machine drum, including removing rust stains.
Procedures for preparing the appliance for storage or long periods of non-use.
Instructions for cleaning the pump filter to ensure proper drainage.
Explanation of display codes providing status information during the wash cycle.
Solutions for problems indicated by specific error codes on the display.
How to diagnose and fix issues not accompanied by display error codes.
What to do if a power failure occurs during a wash cycle and how to safely open the door.
Initial steps for unpacking and preparing the appliance for installation.
Instructions for optionally installing pads to reduce operational noise.
Guide on removing transport bolts before initial operation for safety.
Advice on safely moving the washing machine and reinstalling transport bolts.
How to level the appliance using its adjustable feet for stability and reduced vibration.
Instructions for correctly connecting the drain hose to dispose of wastewater.
Steps for connecting the appliance to the cold water supply.
Guidelines for safely connecting the washing machine to the electrical power source.
Electrical and operational specifications of the appliance.
Detailed measurements of the washing machine, including installation clearances.
