What to do if spinning fails in Haier HW90-BP14636N?
If the spinning function fails in your Haier Washer, it could be due to an unbalanced laundry load. Check the machine load and laundry, then run the spinning program again to resolve this issue.
How to fix CLR FLTR error on my Haier Washer?
The CLR FLTR error on your Haier Washer indicates a drainage error. Check the drain hose installation.
How to remove washing powder residues from laundry after washing in my Haier HW90-BP14636N Washer?
If you find washing powder residues on your laundry after using your Haier Washer, it's likely due to insoluble particles of detergent. You can perform an extra rinse cycle, try brushing the spots from the dry laundry, or choose a different detergent.
What does CLR FLTR mean on my Haier HW90-BP14636N Washer?
The 'CLR FLTR' message on your Haier Washer indicates a drainage error. Check the drain hose installation.
Why is my Haier HW90-BP14636N showing UnB?
The UnB error on your Haier Washer indicates an unbalanced load. To resolve this, check the laundry load in the drum, balance it, and reduce the load size if necessary.
What to do if my Haier Washer spinning fails?
If the spinning function fails on your Haier Washer, the laundry may be unbalanced. Check the machine load and laundry, then run the spinning programme again.
Why is my Haier Washer showing error code E4?
The E4 error code on your Haier Washer means the water level was not reached or the drain hose is self-syphoning. Ensure the tap is fully opened and water pressure is normal. Also, check the drain hose installation.
Why is my Haier HW90-BP14636N Washer leaving washing powder residues on the laundry?
If you notice washing powder residues on your laundry after using your Haier Washer, it could be due to insoluble particles of detergent. Try performing an extra rinse. You can also try to brush the points from the dry laundry or choose another detergent.
Why is my Haier HW90-BP14636N detergent drawer full of excessive foam?
Excessive foam in your Haier Washer, either floating the drum or in the detergent drawer, is likely due to using an inappropriate detergent or using too much detergent. Check detergent recommendations and reduce the amount of detergent you're using.
Why my Haier Washer unsatisfactory washing result?
An unsatisfactory washing result from your Haier Washer can occur for several reasons. The selected programme may not match the degree of pollution, the detergent quantity may not have been sufficient, the maximum load may have been exceeded, or the laundry was unevenly distributed in the drum. Select another programme, choose the detergent according to the degree of pollution and the manufacturer's instructions, reduce loading, and loosen the laundry.
General| Capacity | 9 kg |
|---|---|
| Spin Speed | 1400 rpm |
| Weight | 72 kg |
| Color | White |
| Delay Start | Yes |
| Child Lock | Yes |
| Drum Material | Stainless Steel |
| Dimensions (H x W x D) | 850 x 600 x 550 mm |
| Noise Level (Spinning) | 72 dB |
| Width | 60 cm |
| Depth | 55 cm |
| Noise Level (Spin) | 72 dB |
To Next Page
