To Next Page
D
David ShortSep 4, 2025
What to do if my Haier Washer drains while filling?
- JJoseph ClarkSep 4, 2025
If your Haier Washer is draining while it's being filled, make sure that the drain hose is properly installed and is not in water.
What to do if my Haier Washer drains while filling?
If your Haier Washer is draining while it's being filled, make sure that the drain hose is properly installed and is not in water.
Why does Haier HW90-BP14959 automatically adjust washing time?
The washing programme duration will be adjusted automatically. This is normal and doesn’t affect functionality.
Why does my laundry have grey patches after washing in Haier HW90-BP14959?
If your laundry has grey patches after washing in your Haier Washer, it may be caused by fats such as oils, creams, or ointments. Pretreat the laundry with a special cleaner.
Why are there excessive foam floats in my Haier HW90-BP14959 Washer?
Excessive foam floats in your Haier Washer may be because the detergent is not appropriate. Check detergent recommendations.
Why does my Haier Washer stop before completing the wash cycle?
If the operation of your Haier Washer stops before completing the wash cycle, check the power and water supply.
What to do if water level not reached in Haier HW90-BP14959?
If the water level is not reached in your Haier Washer after 8 minutes, make sure that the tap is fully opened, the water pressure is normal, and check the drain hose installation.
How to remove washing powder residues from laundry in Haier HW90-BP14959?
If washing powder residues are on the laundry, this may be caused by insoluble particles of detergent. Try performing an extra rinse, brush the spots from the dry laundry, or choose another detergent.
Why is the washing result unsatisfactory with my Haier Washer?
An unsatisfactory washing result with your Haier Washer may occur because the degree of pollution does not agree with selected programme, so select another programme. Also, insufficient detergent quantity can affect the result, so choose the detergent according to the degree of pollution and according to manufacturer specifications. Furthermore, exceeding the maximum load or unevenly distributed laundry in the drum can lead to unsatisfactory results, so reduce loading and loosen the laundry.
How to resolve drainage error on Haier HW90-BP14959?
To resolve a drainage error on your Haier Washer, clean the pump filter and check the drain hose installation.
How to fix drainage failure in Haier HW90-BP14959 Washer?
To address a drainage failure in your Haier Washer, try these steps: First, unblock the drain hose. Second, clean the pump filter. Finally, ensure the drain hose is properly installed.
Key safety precautions before the initial operation of the washing machine.
Essential safety guidelines for everyday operation and interaction with the appliance.
Critical safety instructions and precautions during the installation process.
Safety advice related to cleaning procedures and routine maintenance of the machine.
Defines proper usage and warns against misuse to prevent hazards.
Visual identification of front and rear components of the washing machine.
Lists and describes all items supplied with the washing machine.
Explains the Power button, Programme selector, Display, and Detergent drawer functions.
Details the operation of Delay, Temp, Speed, Extra Rinse, and Steam buttons.
Guides on using the Start/Pause button and activating the Child Lock feature.
Provides a guide to selecting programs based on fabric type, load, and desired functions.
Connect power/water, prepare laundry, and load the appliance correctly.
Guides on choosing the right detergent and adding it correctly for optimal washing.
Instructions for switching on, selecting programs, starting, pausing, and cancelling cycles.
Steps after washing, including door lock, end of cycle, and buzzer settings.
Tips for efficient use of energy, water, and detergent for environmental friendliness.
Instructions for cleaning the detergent drawer, machine exterior, water inlet filter, and drum.
Guidance on handling long periods of disuse and cleaning the pump filter.
Explains the meaning of various codes displayed during operation.
Lists problems, causes, and solutions for error codes shown on the display.
Addresses common issues and their solutions when no error code is displayed.
Procedures to follow in case of a power outage during operation.
Covers unpacking, preparing the appliance, and removing transport bolts.
Instructions for moving, aligning, and leveling the washing machine correctly.
Guides on connecting the drain hose, fresh water inlet, and electrical power supply.
Lists detailed technical specifications for the washing machine models.
General| Drum type | Pillow Drum |
|---|---|
| Door color | Black |
| Door hinge | Left |
| Control type | Rotary |
| Display type | LED |
| Door opening | Side opening |
| Loading type | Front-load |
| Product color | White |
| Built-in display | Yes |
| Appliance placement | Freestanding |
| Drum capacity | 9 kg |
| Cycle time (max) | 299 min |
| Spin-drying class | - |
| Maximum spin speed | 1400 RPM |
| Noise level (spin) | 72 dB |
| Noise level (wash) | 55 dB |
| Number of washing programs | 12 |
| Cycle time (quick washing program) | 15 min |
| Annual energy consumption washing | 134 kWh |
| Current | 10 A |
| Connected load | 1950 W |
| AC input voltage | 220-240 V |
| AC input frequency | 50 Hz |
| Power consumption (off) | 0.47 W |
| Water consumption per cycle | - L |
| Energy consumption washing per cycle | 0.63 kWh |
| Package weight | 65000 g |
Weight and Dimensions| Depth | 497 mm |
|---|---|
| Width | 595 mm |
| Height | 850 mm |
| Weight | 62000 g |
| Depth with door open | 1045 mm |
