Why is my Haier HW90-B14979 vibrating so much while spinning?
If your Haier Washer is experiencing strong vibrations while spinning, make sure to remove all transportation bolts. Also, ensure the appliance is on solid, level ground and that the machine load is properly balanced.
How to fix drainage failure in Haier HW90-B14979 Washer?
To resolve drainage failure in your Haier Washer, first, check the drain hose for any blockages and clear them. Also, make sure that the drain hose end isn't higher than 100 cm above the floor.
Why is my Haier HW90-B14979 not working?
If your Haier Washer isn't operating, first, check if the programme has been started. Ensure the door is properly closed and the machine is switched on. Verify the power supply and deactivate the child lock if it's activated.
What to do if my Haier HW90-B14979 Washer is not spinning?
If your Haier Washer is not spinning, check the machine load and laundry, and then run a spinning programme again.
What to do if my Haier Washer operation stops before completing wash cycle?
If your Haier Washer stops before completing the wash cycle, check both your power and water supply to ensure they are functioning correctly.
Why is my Haier HW90-B14979 Washer not filling with water?
If your Haier Washer isn't filling with water, start by checking the water tap to ensure it's open. Then, inspect the inlet hose for any kinks. Also, verify that your water pressure is at least 0.03 MPa, ensure the door is properly closed, and confirm there are no issues with the overall water supply.
Why is my Haier HW90-B14979 Washer draining?
If your Haier Washer is draining, ensure the drain hose is properly installed and that its height is not below 80 cm. Also, make sure the drain hose end is not submerged in water.
How to reduce excessive foam in the detergent drawer of Haier HW90-B14979?
To address excessive foam in the detergent drawer of your Haier Washer, check if you are using the appropriate detergent and reduce the amount of detergent used.
How to improve the washing result of my Haier HW90-B14979 Washer?
If the 'Washing result' is not satisfactory in your Haier Washer, select another programme that better matches the degree of pollution. Ensure you are using enough detergent according to the degree of pollution and manufacturer's instructions. Reduce the load if the maximum has been exceeded, and loosen the laundry if it's unevenly distributed.
How to fix 'Unb' error on Haier HW90-B14979 Washer?
If your Haier Washer displays 'Unb', check and balance the laundry load in the drum and reduce the load.
Ensures no transport damage, bolts removed, packaging cleared, and safe handling due to weight.
Covers child supervision, pet safety, secure agent storage, and essential laundry preparation.
Placement in ventilated area, door clearance, avoiding damp/outdoors, and power cut for leaks.
Details switching the appliance on/off and automatic shutdown features.
Explains how to turn the knob to select programmes and view default settings.
Enables options like Delay, i-time, Temp. Indicators show selection. Options disabled when appliance is switched off.
Details programmes like Cotton, Synthetics, Wool, Delicate, Mix, Cotton 20°C, Eco 40-60 with max load, temp, and functions.
Guides on cleaning the pump filter monthly or when drainage/spinning issues occur. Includes a scalding risk warning.
Addresses issues like CLR FLTR, E2, E4, E8 with causes and solutions for drainage, door lock, and water level errors.
Solutions for common problems like failure to operate, no water, draining while filling, vibration, and stopping mid-cycle.
Explains saving programme settings, resuming operation, and unlocking the door after a power outage.
Details on removing all transport protection elements from the rear of the appliance before use.
Checks for appropriate power supply, earthed socket, no extensions, and UK plug compliance.
General| Door color | Black |
|---|---|
| Door hinge | Left |
| Control type | Rotary, Touch |
| Loading type | Front-load |
| Drum material | Stainless steel |
| Product color | Black, White |
| Built-in display | Yes |
| Custom panel-ready | - |
| Appliance placement | Freestanding |
| Drum capacity | 9 kg |
| Cycle time (max) | 228 min |
| Delay start (max) | 24 h |
| Spin-drying class | B |
| Maximum spin speed | 1400 RPM |
| Noise level (spin) | 69 dB |
| Noise level (wash) | - dB |
| Number of washing programs | 16 |
| Power plug type | Type F (CEE 7/4) |
| AC input voltage | 220 - 240 V |
| Energy efficiency scale | A to G |
| Water consumption per cycle | 48 L |
| Package weight | 82000 g |
Weight and Dimensions| Depth | 530 mm |
|---|---|
| Width | 590 mm |
| Height | 850 mm |
| Weight | 77000 g |
To Next Page