Haier HWF75AW3 - User Manual

Questions and Answers

C
chelseahudsonAug 18, 2025
What to do if my Haier HWF75AW3 Washer has strong vibration while spinning?
- K
  Kyle LopezAug 18, 2025
  If your Haier Washer is vibrating excessively during spinning, it could be due to a few reasons. First, check if all the transportation bolts have been removed from the appliance. Next, ensure that the appliance is placed on solid ground and is leveled properly. Finally, make sure that the machine load is correct and balanced. Remove all transportation bolts. Ensure solid ground and a leveled position. Check load weight and balance.
S
sarahsavageAug 21, 2025
What to do if my Haier HWF75AW3 fails to operate?
- B
  beasleyjoelAug 21, 2025
  If your Haier Washer isn't operating, there are several potential causes: the program might not be started, the door might not be closed properly, the machine might not be switched on, there could be a power failure, or the key lock might be activated. To troubleshoot, check that you've started the program and that the door is fully closed. Ensure the machine is switched on and check the power supply. Also, deactivate the child lock if it's enabled.
A
Adam LawrenceAug 23, 2025
What to do if my Haier Washer is draining?
- T
  Thomas ClarkAug 23, 2025
  If your Haier Washer is draining, it might be because the height of the drain hose is below 80 cm or the drain hose end could be submerged in water. Ensure that the drain hose is properly installed and is not in water.
U
ujosephAug 26, 2025
What to do if my Haier HWF75AW3 Washer has drainage error?
- E
  eric58Aug 26, 2025
  If your Haier Washer shows a drainage error because water is not fully drained within 6 minutes, check the drain hose installation.
S
Stacy Simmons MDAug 28, 2025
What to do if my Haier HWF75AW3 Washer has lock error?
- S
  snyderjoshuaAug 28, 2025
  If your Haier Washer displays a lock error, make sure to shut the door properly.
S
Steven BakerAug 30, 2025
What to do if my Haier Washer has drainage failure?
- C
  Christopher FloresAug 30, 2025
  If your Haier Washer experiences a drainage failure, it could be due to a blocked drain hose or the drain hose end being higher than 100 cm above the floor level. Unblock the drain hose and make sure that the drain hose is properly installed.
A
Ashley PachecoSep 2, 2025
What to do if my Haier HWF75AW3 operation stops for a period of time?
- V
  Victor CampbellSep 2, 2025
  If your Haier Washer stops operating for a period of time, it could be due to the appliance displaying an error code, a problem with the load pattern, or the program performing a soaking cycle. Check the display for any error codes. Try reducing or adjusting the load. You can also cancel the program and restart it.
M
Mark MooreSep 4, 2025
Why is there excessive foam in my Haier Washer drum or detergent drawer?
- J
  Joshua RoachSep 4, 2025
  Excessive foam in your Haier Washer drum or detergent drawer could be because the detergent is not appropriate or the detergent is too concentrated. Check detergent recommendations and dilute the detergent if necessary.
V
Vanessa IbarraSep 7, 2025
Why Haier HWF75AW3 has unsatisfactory washing result?
- E
  eshannonSep 7, 2025
  An unsatisfactory washing result from your Haier Washer could be due to several factors: the selected cycle might not be appropriate for the soil level of the garments, the detergent quantity might not be sufficient, the maximum load might have been exceeded, or the laundry might be unevenly distributed in the drum. To improve results, select another program, choose an adequate detergent and dose according to the manufacturer's specifications, reduce the load, and loosen the laundry.
K
Kyle WhiteSep 9, 2025
Why are there washing powder residues on the laundry in my Haier HWF75AW3?
- K
  Karen MooreSep 9, 2025
  If you notice washing powder residues on your laundry after using your Haier Washer, it could be due to insoluble particles of detergent remaining as white spots. Avoid choosing speed up or express cycles for heavily soiled garments. Try to brush the points from the dry laundry. Choose another detergent. Try adding 'Soak' functionality to the cycle and pretreat the laundry with a special cleaner.

Summary

Safety Information

Before First Use Precautions

Safety precautions and checks to perform before operating the appliance for the first time.

Daily Use Safety Guidelines

Important safety instructions for the everyday operation of the washing machine.

Maintenance and Cleaning Safety

Guidelines for safely performing routine cleaning and maintenance tasks on the appliance.

Installation Safety Requirements

Safety measures and considerations for the proper installation of the washing machine.

Intended Use and Restrictions

Defines the appliance's specific purpose and outlines prohibited uses or modifications.

Product Description

Appliance Overview and Parts

Visual identification and labeling of the front and rear components of the washing machine.

Included Accessories List

Lists and illustrates the accessories that come supplied with the washing machine.

Control Panel Features

Programme Selector and Display

Explanation of the programme selection knob and the information displayed on the control panel.

Detergent Drawer Compartments

Details the various compartments within the detergent drawer for different washing agents.

Function Button Operations

Explains the usage of function buttons like Temp., Spin Speed, Soak, and Eco for program customization.

Advanced Control Functions

Covers delay start, start/pause, key lock, favourite settings, and adding clothes mid-cycle.

Wash Programmes

Consumption Information

Daily Use and Operation

Power and Water Connections

Guidelines for connecting the appliance to the electrical power and water supply.

Laundry Preparation and Loading

Steps for sorting clothes, preparing laundry, and correctly loading the washing machine drum.

Care Chart and Loading Advice

Explanation of garment care symbols and advice on appropriate appliance loading.

Detergent Selection and Use

Guidance on choosing the right detergent for different wash programs and fabric types.

Adding Detergent and Programme Selection

How to add detergent, select a wash program, and adjust individual settings.

Operating the Cycle and Aftercare

Procedures for starting, interrupting, cancelling, and finishing a wash cycle, plus post-wash steps.

Eco-Friendly Washing

Environmentally Responsible Use

Tips for efficient and environmentally conscious appliance usage to save energy, water, and detergent.

Care and Cleaning Procedures

Cleaning Key Components

How to clean the detergent drawer, machine exterior, water inlet filter, and washing drum.

Long Disuse and Pump Filter Maintenance

Preparing the appliance for extended periods of non-use and cleaning the pump filter.

Troubleshooting Guide

Understanding Error and Information Codes

Meanings of appliance display codes and identifying common operational errors.

Solving Operational Problems

Solutions for common issues not indicated by display codes and general operational problems.

Power Failure and Foam Issues

Addressing problems related to power outages, excessive foam detection, and unbalanced loads.

Installation Guide

Preparation and Transport Bolt Removal

Initial setup, packaging disposal, and instructions for removing transport bolts.

Noise Reduction and Leveling

Installing optional noise reduction pads and adjusting appliance feet for stability.

Drain and Water Connections

How to properly connect the drain hose and the fresh water inlet.

Electrical Connection

Guidelines for safely connecting the appliance to the electrical power supply.

Technical Specifications

Additional Technical Data

Key electrical, performance, and weight specifications of the washing machine.

Product Dimensions and Clearances

Detailed measurements of the appliance and required installation space.

Customer Service and Support