Note: Factory settings
there is no special requirement default settings are recommended.
NE AU
3: compartment for softener.
4: lock tab, press it down to pull out dispenser drawer.
The recommendation on the type of detergents is
suitable for the various washing temperatures, please
refer to the manual of detergent (see P11).
3.4 Function buttons
The function buttons (Fig. 3-5) enable additional options
in the selected programme before programme starts. The
related indicators are displayed.
By switching off the appliance or setting a new programme,
all options are disabled.
If a button has multiple options, the desired option can be
selected by pressing the button sequentially.
3-5
3.4.1 3.4.2 3.4.3 3.4.4 3.4.5
3-6
Touch this button (Fig. 3-6) to change the washing temperature
of the programme. If no value is selected (the display “--℃”)
the water will not be heated.
3.4.1 Function button “Temp.”
3.4.2 Function button “Spin Speed”
3-7
3-8
3.4.3 Function button “Soak”
Touch this button (Figure 3-8), select the depth soaking time,
panel displays , and some programs ”Soak“ are not optional.
Touch this button (Fig. 3-7) to change the spin speed of the
programme. If ” “ is selected,the laundry will not spin.
3.4.4 Function button “Eco”
3-9
9
Touch the button (Fig. 3-9) to use the Eco option to save water
and energy, panel displays , and some programs ”Eco“ are not
optional.
To Next Page
Loading...
Need help?
General
