Haier HW70-12829 User Manual

3-Control panel
GB
10
3.5.4-Function button
“Extra rinse“
Press this button (Fig. 3-5.4) to rinse the laundry more
intense with fresh water. This is recommended for
people with sensitive skin. One or two additional rinse
cycles are available.
3.5.3-Function button
“Delay”
Press this button (Fig. 3-5.3) to start the programme
with a delay. End time delay could be increased in steps
of 30 minutes from 0,5-24h. For example display o
6:30 means end of programme cycle will be in 6 hours
and 30 minutes. Press
“Start/Pause” button to ac-
tivate the time delay. It is not applicable to programme
COTTON + and SPIN.
Note: Liquid detergent
If using liquid detergent, it is not recommended to acti-
vate the end time delay.
3.6 Child lock
Press button „Temperature“ and ”Spin speed”
(Fig. 3-6.1) for 3 seconds simultaneously to block
all panel elements against activation. For unlocking
please press again the two buttons.
The display shows cLo
I- (Fig. 3-6.2) if a button will be
pressed, when the child lock is activated. The change
is not running.
3-14
R
15 min
60 min
+
program
3-6.1
3-6.2
R
15 min
60 min
+
program
3-5.3
R
15 min
60 min
+
program
3-5.4
3.7 Indicators
The indicators mentioned in gure 3-7 light up when
corresponding function/programme is activated.
R
15 min
60 min
+
program
14
9
13 12
10
3-7
3.8 Display
The display (Fig. 3-8) shows following information:
▶ Washing time
▶ End time delay
▶ Error codes and service information
3-8

Haier HW70-12829 Specifications

General

Brand	Haier
Model	HW70-12829
Category	Washer
Language	English