3-Control panel
9
3.2 “Power“ button
Press this button (Fig. 3-2) gently to switch on, the dis-
play is shining. Press it again for about 2 seconds to
switch o. If no panel element or programme is acti-
vated after a while machine will shut down automatically.
3.5 Function buttons
The function buttons (Fig. 3-5) enables additional op-
tions in the selected programme before programme
start. The related indicators are displayed.
By switching o the appliance or setting a new pro-
gramme, all options are disabled.
If a button has multiple options, the desired option can
be selected by pressing the button sequentially.
To delete the setting or to cancel the setting process,
press the function button until the desired LED lights
or -in case of only one option- the LED switches o.
Note: Factory settings
To get best results in each programme Haier has well
dened specic default settings. If there is no special
requirement default settings are recommended.
3.4 “Start/Pause“ button
Press this button (Fig. 3-4) gently to start or interrupt
the currently displayed programme. During programme
interruption the digits on the display are blinking.
3-2
3.3 Programme selector
Press one of these buttons (Fig. 3-3) sequentially until
the indicator of the desired programme lights up, and
the default settings are displayed.
R
15 min
60 min
+
program
3-3
3-5
3.5.1-Function button ”Temperature“
Press this button (Fig. 3-5.1) to change the washing
temperature of the programme. If no value is illumi-
nated the water will not heated.
In conjunction with the
“Spin speed” button, the child
lock function can be switch on/o (see CHILD LOCK).
3-7 3-8
3-5.2
3-5.1
3.5.2-Function button “Spin speed”
Press this button (Fig. 3-5.2) to change or deselect the
spin of the programme. If no value is illuminated the
laundry will not spun.
In conjunction with the
“Temperature” button, the child
lock function can be switch on/o (see CHILD LOCK).
To Next Page
Loading...
Need help?
General
