16
6.7 Switch on the appliance
Press the “Power“- button to switch on the appli-
ance (Fig. 6-7). The Display is shining.
6-7
6.6 Adding detergent
1. Slide out the detergent drawer.
2. Put the required chemicals into corresponding
compartments (Fig. 6-6)
3. Push back the drawer gently.
Note:
▶ Remove detergent residues before next wash cycle from the detergent drawer.
▶ Do not overuse detergent or softener.
▶ Please follow the instruction on the detergent package.
▶ Always ll the detergent just before the beginning of the wash cycle.
▶ Concentrated liquid detergent should be diluted before adding into compartment 2.
▶ The best use of liquid detergent is by using a dosing ball, which is given with the laun-
dry into the washing machine.
▶ Do not use liquid detergent if „end time delay“ is selected.
▶ Carefully choose the programme settings according to the care symbols on all laun-
dry labels and according to the programme table.
6.8 Select a programme
To get the best washing results, select a programme
which ts the degree of soiling and sort of laundry
type.
Press button or (Fig. 6-8) sequentially until the
indicator of the desired programme lights up, and the
default settings are displayed.
6.9 Add individual selections
Select required options and settings (Fig. 6-9); refer to
CONTROL PANEL.
6-9
Note: Odour removal
Before rst use we recommended to run programme HYGIENIC with no load and
small amount of detergent in washing agent compartment (2) or special machine clean-
er to remove possibly corruptive residues.
6-6
R
To Next Page
Loading...
Need help?
General
