Why won't my Haier Washing machine start?
If your Haier Washing machine won't start, here are a few things to check: * Make sure the program has been started. * Ensure the door is properly closed. * Verify the machine is switched on. * Check for a power failure. * Deactivate the child lock if it's enabled.
Why is my Haier Washing machine not filling with water?
If your Haier Washing machine isn't filling with water, try the following: * Check that the water tap is open. * Inspect the inlet hose for kinks. * Unblock the inlet hose filter. * Check the water pressure to ensure it's at least 0.03 MPa. * Ensure the door is properly closed. * Ensure the water supply.
How to fix drainage failure in Haier Washing machine?
If your Haier Washing machine is not draining, consider the following: * Unblock the drain hose. * Clean the pump filter. * Make sure that drain hose is properly installed and its end is not higher than 100 cm above floor level.
Why is my Haier HW70-BP14636 Washing machine vibrating so much?
If your Haier washing machine is vibrating excessively during spinning, the causes might be: * Not all transportation bolts have been removed. Remove all transportation bolts. * Appliance has no solid position. Ensure solid ground and a leveled position. * Machine load is not correct. Check load weight and balance.
Why is the spinning cycle failing on my Haier HW70-BP14636?
If the spinning cycle fails on your Haier Washing machine, it might be due to an unbalance of laundry. Check the machine load and laundry, then run a spinning program again.
How to improve unsatisfactory washing results with my Haier HW70-BP14636 Washing machine?
If you're getting unsatisfactory washing results with your Haier Washing machine: * Select another program if the degree of pollution does not agree with selected program. * Choose the detergent according to the degree of pollution and according to manufacturer specifications if the detergent quantity was not sufficient. * Reduce loading if the maximum load has been exceeded. * Loose the laundry if the laundry was unevenly distributed in the drum.
How to remove washing powder residues from laundry in my Haier Washing machine?
If you find washing powder residues on your laundry after washing with your Haier Washing machine: * Perform an extra rinse, insoluble particles of detergent can remain as white spots on the laundry. * Try to brush the points from the dry laundry. * Choose another detergent.
What to do if my Haier HW70-BP14636 shows UNB error?
If your Haier Washing machine displays an 'UNB' error, it indicates an unbalanced load. To resolve this: * Check and balance the laundry load in the drum. * Reduce the load if necessary.
What does E1 error mean on my Haier Washing machine?
If your Haier Washing machine displays an 'E1' error, it means there's a drainage issue where water isn't fully drained within 6 minutes. Try cleaning the pump filter and checking the drain hose installation.
Why is my Haier Washing machine draining while filling?
If your Haier Washing machine is draining while it's filling, it could be due to: * The height of the drain hose being below 80 cm. Make sure that drain hose is properly installed. * The drain hose end reaching into the water. Make sure the drain hose is not in water.
Crucial safety warnings for appliance usage, installation, and daily operation.
Defines appliance purpose, limitations, and specific warnings.
Identifies and illustrates the main parts of the washing machine.
Lists and describes the items supplied with the washing machine.
Overview of the control panel, display, and programme selector.
Details on using temperature, spin speed, and intensity functions.
Explains delay start, start/pause, and child lock functionalities.
Compares wash programmes, load capacities, temperatures, and spin speeds.
Provides data on energy and water consumption for various wash cycles.
Instructions for connecting the appliance to power and water supply.
Guidelines for sorting, preparing, and loading laundry correctly.
Guidance on choosing detergents and selecting wash programmes.
Steps for adding detergent, switching on, and selecting programmes.
How to start, interrupt, cancel, and manage wash cycles and the door lock.
Advice on optimizing energy, water, and detergent use.
Instructions for cleaning the detergent drawer, machine exterior, and drum.
Guidance on cleaning the inlet valve filter and pump filter.
Recommendations for appliance care during extended periods of disuse.
Explains displayed codes and messages for problem identification.
Provides solutions for problems like water fill errors, draining, or vibration.
Steps to take and safety precautions during a power outage.
Unpacking, initial setup, and removal of transport safety bolts.
Instructions for moving and adjusting the appliance for stability.
Guides for connecting the water inlet and power supply.
Detailed technical data, energy ratings, and performance metrics.
Information on dimensions, voltage, weight, and compliance.
How to contact support, find service, and understand warranty terms.
General| Load Capacity | 7 kg |
|---|---|
| Spin Speed | 1400 rpm |
| Energy Efficiency Class | A+++ |
| Dimensions (H x W x D) | 85 x 60 x 46 cm |
| Weight | 62 kg |
| Color | White |
| Loading type | Front Load |
| Child Lock | Yes |
| Inverter Motor | Yes |
| Delay Start | Up to 24 hours |
To Next Page
