Why is my Haier HWD90-BP14636 Washer/Dryer showing error code E4?
The E4 error code on your Haier Washer/Dryer means the water level was not reached after 8 minutes. Make sure that the tap is fully opened and the water pressure is normal. Also, check the drain hose installation, as the drain hose may be self-syphoning.
Why is my Haier HWD90-BP14636 Washer/Dryer showing error code UNB?
The UNB error code on your Haier Washer/Dryer indicates an unbalanced load. Check and balance the laundry load in the drum and reduce the load.
Why is my Haier HWD90-BP14636 Washer/Dryer showing error code E2?
The E2 error code on your Haier Washer/Dryer indicates a lock-error. Ensure that you shut the door properly.
General| Type | Washer/Dryer Combo |
|---|---|
| Washing Capacity | 9 kg |
| Drying Capacity | 6 kg |
| Spin Speed | 1400 rpm |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Color | White |
| Noise Level (Washing) | 56 dB |
| Programs | 16 |
| Delay Start | Yes |
| Child Lock | Yes |
| Display Type | LED |
Essential safety checks before operating the appliance for the first time.
Crucial safety advice for everyday operation and handling of the appliance.
Guidelines for keeping children safe around the appliance during operation and non-operation.
Safety precautions for cleaning and maintaining the washing machine.
Safety requirements for installing the appliance in its location.
Securing the control panel to prevent unintended operation.
Best practices for loading laundry to prevent damage and ensure efficient operation.
How to power on the machine and choose a wash program.
Solutions for errors related to sensors, heating, motor, and water level.
Resolving issues like appliance failure to operate or water filling problems.
Addressing issues like excessive vibration, program stops, and foam formation.
Procedures to follow in case of an electrical power interruption during a cycle.
Initial steps, packaging disposal, and removing shipping bolts.
Safely moving, leveling the appliance, and connecting the drain hose.
Connecting the drain hose to sink/pipe and inlet hose to water tap.
Ensuring correct power supply, socket, and plug for safe operation.
To Next Page