LOCATING UNIT IN
WINDOW
Open the window and mark center line on the
center of the inner sill.
INNER SI_
INDOOR SIDE J
ATTACH8ASEPAN
ANGLE
Install the basepan angle behind the inner windowsill, with
the shod side of basepan angle as shown, Use the 2 shod
screws 13/32' provided.
The basepan angle helps 1o hold unil securely in place.
Be sure to place basepan angle edge flush against back
of inner sill.
INNER SILL
SHORT SCREW13/32'
©L
[ENTER LINE
|HS|DE
SHORT SIDE
OUTSiDE
BASEPAN ANGLE
INSTALLTHE AIR CONDITIONER
IN THE WINDOW
Carefully lift the air conditioner and slide it into the open
window. Make sure the bosom guide of the air conditioner
drops into the notches of the basepan angle.
While steadying the air conditioner, carefully bring the
window sash down behind the upper guide of the air
condilionen
WINDOW
UPPER GUIDE
BOTTOM GUIDE
BASEPAN ANGLE
ABOUT 1/4 'l
r
INSTALLTHESEALGASKET
ANDSASHLOCK
BASEPAN ANGLE
Extend the side cudains to fill the
window opening using 4 wood screws
31/32' to secure them,
Cut the seal gasket to the window
width. Stuff the sash seal between the
glass and the window to prevent air
and insects from geffing into the room.
Fasten the basepan angle, using a
shod screw 13/32'.
SHORT SCREW13
WOOD SCREW31
WINDOW SEAL GASKET
13
To Next Page
Loading...
