What to do if my Haier HWM70-10A makes abnormal sound?
If your Haier Washer makes abnormal sounds, it could be due to several reasons. First, ensure the machine is level. Second, check for and remove any foreign objects inside the washer. Lastly, rearrange the load to ensure it's balanced, and then close the top lid.
Why Haier HWM70-10A has no water inlet?
If your Haier Washer isn't filling with water, make sure the power plug is properly inserted, the water faucet is open, and both the POWER ON/OFF and START/PAUSE buttons have been pressed.
Why my Haier HWM70-10A Washer does not act?
If your Haier Washer isn't working, ensure there is a power supply and that the power plug is properly inserted. Also, make sure the water level has reached the preset position. Alternatively, check that the top lid is securely closed and the items inside are arranged flat.
What to do if my Haier Washer displays E3 or E4 error?
The E3 error on your Haier Washer indicates the safety switch is activated, preventing spinning. This can happen if the load is unbalanced or the machine is tilted. Try to reorder the laundries and close the top lid. Ensure the washing machine is set horizontally, then open and close the top lid once. An E4 error indicates a water inlet issue. Ensure the water faucet is open and there is no water supply failure. If not, clean the water inlet valve and try again by pressing the Start/Pause button. If there is poor cascade current, clear any foreign material blocking the spray outlet.
What to do if my Haier HWM70-10A displays E0, E1, or E2 error?
The E0, E1, or E2 error on your Haier Washer indicates a lid or drainage issue. Ensure the top lid is closed properly. If the problem persists, check the drain hose for blockages and clear any foreign material. Then, press the start button again.
Covers proper plug usage, grounding, and avoiding wet hands to prevent electrical hazards.
Addresses carpet installation, damp locations, and water temperature limits to ensure safe operation.
Comprehensive guide on connecting the water inlet hose to the faucet and washer.
Explanation of the functions of various buttons like Power, Program, and Process on the control panel.
Provides solutions for common problems like drainage, spinning, or water inlet failures.
General| Type | Top Load |
|---|---|
| Capacity | 7 kg |
| Spin Speed | 700 RPM |
| Color | White |
| Wash Programs | Delicate, Heavy, Quick |
| Washing Programs | Standard, Delicate |
| Energy Rating | 3 Stars |
To Next Page
