The water tap leaks.
Is the water inlet hose loose?
Fasten the inlet hose.
Trouble-shooting
Common occurrence
16
Problem Possible causes What to do
The spinning is intermittent after it starts. Redistribute the load evenly.Close the top
lid.
Select spin program,but it does not work.
There may be water in the drain hose when
first used.
It may be residual water after performance
inspection by the factory.
The program is setting the drain time,there
will be a pause before the spin program
starts.
Situation Cause
The wash procedure pauses. The cloth sensor is detecting, it will add
water after about 48 senconds.
The water level sensor has
failed.
The display shows F2.
Please contact Customer
Care.
To Next Page
Loading...
Need help?
General
