Process,remain time digitron
It displays "--" during detecting.
It displays total remained time
(min). If the total time exceeds 99
minutes, it uses "A" on tens digit
to represent100 minutes, and uses
"b" to represent 110 minutes.
E.g. A3" represents 103 minutes.
It displays abnormal symbol in
abnormal situation.
(See to Page12)
"
5 Use the operation buttons
a Description of operation button
"POWER ON/OFF" button
Push the " POWER ON/OFF" button to
switch on the power.
Under power-on mode, push it to switch
off the power.
Push the " POWER ON/OFF" button to
switch on the power. If the " POWER
ON/OFF" button is not pushed, the
machine will switch off the power
automatically after 5 minutes.
Remarks: After pressing "Power On/Off" to connect power supply, if the washing
machine lasts idle more than 5 min, it would automatically shut off the supply.
WATER
LEVEL
POWER
ON/OFF
START
PAUSE
"START/PAUSE" button
After the power is switched on,
press it to start the machine.
During working,push it to pause.
During pause,push this button to
restart and go on working
The user selects a suitable water
level depending on the load.
" WATER LEVEL"button
"
" button
you
can select one or several
of
Press
programs
" WASH CYCLE " button
NORMAL HEAVY QUICK WASH
and SPIN ONLY.
8
WASH
CYCLE
WASH CYCLE
TIME
REMAINING
To Next Page
Loading...
Need help?
General
