12
Control Panel
Compressor
Defosting
Power
Alarm
Silence
Alarm
Test
Light
Set
Upper
Lower
13
Application method
Temperature display
Caution
The displayed temperatures indicate upper and lower temperatures of the refrigerator perceived
by the sensor in glycerin bottle. It is not always of 5 ℃ . Temperature sensor indicates average
temperature inside the refrigerator.
TEMP. SET
If you want to reset the temperature, for example, 5
℃
is set originally and you want to change the
temperature to 5.5℃ , please operate according to the following steps:
TEMP. SET
Key Operation Display
1 The temperature in the refrigerator displays.
2 Press “Set” for 5s at the same time. TS
3 Click “Set” The current parameter value fl ashes.
4
Adjust the parameter value by pressing
the “Upper” and “Lower” key,pressing
the “Set” key to save.
The temperature in the refrigerator displays.
Defrost Cycle
Forced defrost cycle
When the accumulative startup time of the compressor reaches a certain value (8 hours by
default)
,
the equipment will start the forced defrost cycle. Once the frost is thawed, the refrigerator will
resume normal operation. The temperature in the box may rise during the defrosting cycle.
To Previous Page
Loading...
