8
Follow the below procedures for initial start-up and consequent operations of the unit:
Connect the power cord to a dedicated socket with appropriate specication with the unit
empety-loaded, make sure the power supply and rating is 220V-240V/50Hz.
Turn on the battery switch and press the SET button to silent the alarm. The light alarm
continues to operate until the chamber temperature reaches 2°C -8°C.
The temperature of the refrigerator can be stabilized at 2-8°C after a few hours of running.
Switch on the refrigerator and turn on the power switch on the electric control box on the
right side of it. The alarm buzzer sometime operates, which is normal.
The refrigerator is set to operate at 5°C at the factory. There is no need to change the
control settings.
Turn on the light switch to check whether the lamp inside the refrigerator can work
normally.
Once the refrigerator has reached the stable condition and all functions are normal,
load in the products gradually.
Start-up of unit
To Next Page
Loading...
