7
6.Installation shelf and price tag
Take out the shelves, price tag and shelf clips in the
refrigerator. Fix the shelf clips to the shelf bars of the machine
body at the appropriate distance, as shown on the right.
7.Back support
Remove the four M5 screws on the back panel of the machine
body and then use them to x the back support to the machine
body.
8.Installation of drawer slides and drawers (optional)
• First insert the rear end of the drawer slide into the rear shelf
bar, and then insert the front shelf bar at the front side and x
it with M4 screws, as shown in Fig. 1 on the right;
•Next, push the drawer into the machine box along the
direction of the slide, as shown in Fig. 2 on the right.
Fig.1
Fig.2
①
③
②
9. RFID antenna
（
HYC-509R/1099R
）
• Take out the RFID antenna from the instruction bag and x it
on the antenna with a nut Interface, and then put the suction
cup on the top of the box.
To Next Page
Loading...
