will not be changed after executing the Unlock
option.
Tuning Lock ❖
Press CH+ /CH- to select the Tuning Lock option, and
then press VOL-
/
VOL+ to set ON or OFF.
(If set ON, the Tuning Menu is not available in TV
mode. To make any operation related to the Tuning
Menu, it is necessary to enter the Lock Set menu to set
Tuning Lock OFF or execute the Unlock option.)
Preset Source ❖
Preset Source may be set as O, TV, AV, Component,
HDMI, PC and USB. When the Preset Source is set as
TV, after entering the Preset Channel menu, press
VOL-
/
VOL+ to select the preset channel, and
the
channel will be forcibly switched to the preset one
upon turning the TV on; when the Preset Source is set
as other signal sources, the TV will be forcibly switched
to the preset source upon turning on. For example,
when the Preset Source is set as
YP
b
P
r
/YC
b
C
r
, the TV
will be switched to
YP
b
P
r
/YC
b
C
r
upon turning on;
when set as OFF, the preset function will be closed.
Preset Channel ❖
Only when the Preset Source is set as TV can the
Preset Channel option be available. Press VOL-
/
VOL+
to select preset channels from 1-125, OFF.
Source Lock ❖
This function is used to prohibit watching a program
from various external inputs, e.g. AV and PC, etc. Press
CH+ /CH- to select a certain option, and then press
VOL-
/
VOL+ to set an external input lock ON or OFF.
If an external input lock is set ON, after entering this
mode, the screen will display blue background with
muting and a prompt Source Lock; during Source
Lock prompt, Source Lock will remain if there is no
other display on the screen. To watch a program
from a locked external input, just enter Source Lock
submenu to set corresponding status as OFF or
execute the Unlock option in the Lock Set menu.
Child Lock ❖
Press CH+ /CH- to select the Child Lock option, and
then press VOL-
/
VOL+ to set ON or OFF. If set ON,
this control key will not respond, and the screen will
display Child Lock when the key is pressed; if no other
operation is made, the display will automatically
disappear later. To resume Child Lock function, just
enter the Lock Set menu to set Child Lock OFF or
execute the Unlock option.
Max Volume ❖
Press CH+ /CH- to select the Max Volume option,
and then press VOL-
/
VOL+ to freely adjust the max
volume within the range of 0~100. After finishing the
setting, the max volume in the Volume menu will not
exceed the preset max volume; for example, if the
preset max volume is 30, the volume in the Volume
menu can not be increased any longer upon reaching
30; if the preset max volume is less than the value in
the Volume menu, the latter will decrease along with
the decrease of preset max volume.
On Volume ❖
Press CH+ /CH- to select the Power on Volume
option, and then press VOL-
/
VOL+ to freely adjust
the volume within the range of 0~100.
Unlock ❖
Press CH+ /CH- to select the Unlock option, and then
press VOL+ to clear all the lock settings, namely set
all the lock setting options as OFF; the Preset Channel
is set as OFF and max volume returns to 100 (except
password).
I ❖
2
C Bus
It is no need for user to select the after-sale service
option.
USB Mode
Note
The diagrams in the following section are R
schematic and only for your reference. Please see
the actual product if necessary.
TO USE THE USB DEVICE
Supported file formats:A
Photo: *.jpg;•
Music: *.mp3;•
TEXT Reader: *.txt•
Note
Due to the particularity of file coding, some files R
may be unable to read.
Supported equipment:
B
Support the USB ash disks that supports Mass
Storage Protocol and whose file system is FAT32,
If USB equipment could not be identified due
to unsupported file system, please format the
To Next Page
Loading...
Need help?
General
