Need help?Do you have a question about the Haier QBJ1-200A and is the answer not in the manual?
General| Model | QBJ1-200A |
|---|---|
| Category | Water Heater |
| Capacity | 200L |
| Rated Power | 2000 W |
| Rated Voltage | 220V |
| Rated Frequency | 50 Hz |
| Waterproof Grade | IPX4 |
| Heating Element | Stainless Steel |
| Color | White |
| Type | Electric |
| Temperature Control | Thermostat |
| Safety Features | Overheat Protection |
| Material | Enamel |
Essential safety guidelines for proper and safe operation of the solar water heater.
Key advice and precautions to be followed before installing and operating the water heater.
Guidance on choosing the optimal placement for the solar water heater installation.
Details on the visual aspects and physical measurements for horizontal unit installation.
Step-by-step instructions for assembling the primary support structure of the unit.
Visual aid illustrating the correct procedure for assembling the support frame.
Procedures for securely attaching the water reservoir to the assembled support frame.
Methods and recommendations for firmly securing the entire frame to the installation base.
Instructions for the correct installation of the essential vacuum tubes into the system.
Schematic showing external plumbing connections for the water tank, including dimensions.
Diagram detailing the electrical and plumbing connections within the unit's circuit.
Rules and guidelines for making the necessary electrical and plumbing circuit connections.
Step-by-step process for initiating the operation of the solar water heater.
Identification of frequent problems and their corresponding solutions for the unit.
An inventory of all components supplied with the water heater for each model.
To Next Page
