Haier XF 5C4M1X User Manual

19
EN
9. LOADING THE RINSE AID
(Fig. A "3")
Rinse aid, which is automatically released
during the last rinsing cycle, helps the
dishes to dry quickly and prevents spots
and stains forming.
The rinse aid container is next to the
detergent container (fig.A "3").
To open, press the tab on the lid of the
rinse aid dispenser and lift it.
Add rinse aid up to the Max. indication.
 If the rinse aid spills out, remove it from
the wash tank.
 Spilled rinse aid can cause excessive
frothing during the wash cycle.
 Close the lid of the rinse aid dispenser.
 The lid clicks into the locking position.
Always use rinse additives that are suitable
for automatic dishwashers.
Models equipped with display or
rinse aid indicator (only on some
models)
When it becomes necessary to fill the rinse
aid container, the display will indicate the
lack of rinse aid (in models with display), or
the designated indicator light on the
dashboard will turn on.
Adjusting the amount of rinse aid
1. Switch the appliance on, press
"ON/OFF"
button.
2. Hold the "SETTINGS (5Sec.)"
button, a short beep will sound.
3.The "SETTINGS" message appears on
the display.
4. Press the "SELECTION" buttons
to navigate the submenu.
5. Choose the "RINSE AID" option.
6. Press "CONFIRM" to access the
regulation levels.
7. Press "SELECTION" to choose
the value (R1......R6). With level R0, no
rinse aid is dispensed.
8. Press "CONFIRM" .
9. Press "SETTINGS (5Sec.)" to
exit the settings menu.
ALWAYS start the procedure with the
dishwasher turned off.
This has been factory-set to level 4, as
this satisfies the majority of users.
Filling the rinse aid container
Rinse aid

Haier XF 5C4M1X Specifications

General

Brand	Haier
Model	XF 5C4M1X
Category	Dishwasher
Language	English