EasyManua.ls Logo

Haier XQB50-10 - User Manual

Haier XQB50-10
20 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Names of the parts.............the 2nd cover
Safety precautions .......................1
Introduction of the special functions.........3
Installation and adjustment ..................3
Install the water inlet hose............5
Preparation before washing .............7
Put in the laundries .........................8
Usage of the detergent .......................9
Use the operation buttons ................10
Close the top lid ........................14
Finish washing ............................14
Disposal after washing ....................15
Trouble shooting Answer to questions.....16
Packing list ...................................17
Specifications.........................the back cover
Contents
Before using
Using process
Please read this manual carefully before using.
Please retain it attentively for future reference.
User's manual
Full Automatic Washing Machine
XQB50-10
Please check if the power receptacle is earthed
reliably before usage to guarantee your safety.
The manufacturer is not responsible for any
risks occurred owing to disobey these
stipulations.

Table of Contents

Other manuals for Haier XQB50-10

Preview: Service Manual
Service Manual18 pages
Preview: Manual Del Usuario
Manual Del Usuario20 pages

Questions and Answers

  • A
    Alexis CarlsonAug 14, 2025
    Why Haier XQB50-10 Washer won't wash, act or spin?
    • S
      Shannon RobinsonAug 14, 2025
      Your Haier Washer might not wash, act, or spin due to several reasons: - There could be a power failure, or the power plug might be loose. Make sure the power is on and the plug is inserted tightly. - The water level might not be reaching the set level. Ensure affusion to the set water level. - The top lid might not be closed properly. Ensure the top lid is closed. - The laundries might not be put orderly. Put the laundries orderly.
  • A
    alyssa18Aug 18, 2025
    How to fix Haier XQB50-10 when it doesn't drain or drains slowly and shows E1?
    • S
      Sheila RiveraAug 18, 2025
      If your Haier Washer isn't draining properly and the nixie tube shows "E1", buzzing, it could be due to these reasons: - The drain hose might be placed incorrectly. Put down the drain hose and open and close the top lid once. - The drain hose might be blocked by foreign material. Clean the foreign material and open and close the top lid once.
  • C
    Crystal SmithAug 21, 2025
    Why is there an abnormal sound inside my Haier XQB50-10?
    • C
      Christina PhillipsAug 21, 2025
      An abnormal sound inside your Haier Washer could be due to: - The machine not being level. Level the machine properly. - The laundries being placed unevenly during spinning. Re-order the laundries.
  • J
    jessecurryAug 25, 2025
    Why does the water faucet leak on my Haier XQB50-10 Washer?
    • B
      Barbara HerreraAug 25, 2025
      If the water faucet on your Haier Washer is leaking, it could be because the jointer screw of the water inlet hose is loose or twisted awry. Fasten the jointer screw properly.
  • G
    garygomezAug 28, 2025
    What to do if Haier XQB50-10 is not filling with water or fills slowly and shows E4?
    • C
      Christopher SolomonAug 28, 2025
      If your Haier Washer is not filling with water or is filling slowly and the nixie tube indicates "E4", it could be due to the following reasons: - The water tap might not be open. Open the water tap and push the "Start/Pause" button. - The water inlet valve might be blocked. Clean the water inlet valve and push the "Start/Pause" button. - The water pressure might be too low. Wait for normal water pressure before use.
  • L
    laneannAug 31, 2025
    Why Haier Washer stops spinning, shows E3, and buzzes?
    • T
      thernandezAug 31, 2025
      If your Haier Washer stops spinning, displays "E3" on the nixie tube, and buzzes, it could be because: - The laundries are not placed evenly. Re-order the laundries and close the top lid. - The machine is not level. Level the machine in the right position and open and close the top lid once.
  • B
    Brooke GomezSep 3, 2025
    What to do if Haier Washer pauses during spin, shows E2 and buzzing?
    • Q
      qrichardsSep 3, 2025
      If your Haier Washer pauses during the spin cycle and the nixie tube indicates "E2", buzzing, it is likely because the top cover is open. Close the top lid.
  • R
    Robert WrightSep 6, 2025
    How to stop buzzing and E0 error on Haier XQB50-10?
    • L
      Latasha LeeSep 6, 2025
      If your Haier Washer is buzzing and the nixie tube indicates "E0" upon reservation start, it means the top lid is not closed. Close the top lid.
  • C
    Carol ArmstrongSep 10, 2025
    What to do if Haier XQB50-10 Washer has poor or no waterfall flow?
    • G
      goliverSep 12, 2025
      If your Haier Washer has poor or no waterfall flow, it might be because the nozzle is choked with foreign bodies. Remove the foreign bodies.

Summary

General Usage Guidelines

Manual Reading and Retention

Emphasizes the importance of reading the manual before operation for correct usage.

Safety: Earthing and Manufacturer Disclaimer

Highlights earthing needs and states manufacturer's non-responsibility for risks from non-compliance.

Washing Machine Components and Symbols

Identification of Parts

Identifies and illustrates the various external and internal parts of the washing machine.

Included Accessories List

Lists and describes the accessories provided with the washing machine.

Understanding Safety Symbols

Explains the meaning of warning and forbidden signs used in the manual.

Safety Precautions - Electrical and Environmental

Electrical Safety Measures

Details precautions for safe use of the power plug, receptacle, and earthing.

Environmental and Usage Safety

Advises against damp locations, hot water, blocking vents, and washing waterproof items.

Safety Precautions - Operation and Maintenance

Safe Operation Practices

Warns against inserting hands into the working machine and unsupervised use by children.

Prohibited Actions and Upkeep

Advises against self-repair, placing heavy items, using volatile materials, and keeping away from heat.

Pre-Wash Preparation and Filter Care

Guides on removing foreign materials from pockets and maintaining the lint filter.

Special Functions and Initial Installation

Special Wash Modes and Alarms

Covers 'Hand Scrub' wash and the open cover alarm feature.

Initial Installation Steps

Guides on installing the lint filter, bottom plate, and adjusting machine position.

Drain Hose Installation and Usage

Changing Drain Hose Direction

Instructions for changing the direction of the drain hose for proper drainage.

Drain Hose Usage Guidelines

Details on ensuring smooth drainage, hose height, and avoiding kinks.

Water Inlet Hose Installation - Tap Connection

Water Tap Compatibility Check

Criteria for selecting a suitable water tap for hose connection.

Connecting Water Inlet Hose to Tap

Step-by-step guide for connecting the water inlet hose to the faucet.

Water Inlet Hose Installation - Machine Connection

Connecting Water Inlet Hose to Machine

Instructions for attaching the water inlet hose to the washing machine's valve.

Securing and Disconnecting Hose

Procedure for ensuring secure connections and safely removing the water inlet hose.

Preparation Before Washing

Initial Washing Setup Steps

Steps for connecting the water inlet hose, earthing, and placing the drain hose.

Laundry Preparation and Sorting

Guidance on preparing laundries: checking pockets, fasteners, and fabric types.

Loading the Laundries

Washing Capacity and Load Size

Information on the machine's capacity and how load size affects washing.

Reference Weights for Laundry Items

Provides approximate weights for common laundry items for load balancing.

Adding Detergent and Whitener

How to Use the Whitener

Instructions on how to use whitener, including dilution and application.

How to Use Washing Powder

Guidance on adding washing powder, including direct dissolution and pre-dissolution.

Detergent and Water Quantity Chart

A table detailing recommended detergent and water quantities based on laundry load.

Operation Buttons and Indicators

Indicator Light Meanings

Explains the different states and meanings of the machine's indicator lights.

Selecting Wash Programs and Procedures

Guides on using Program and Procedure buttons for wash cycles.

Selecting Water Level

Instructions for using the 'Water Level' button to set the appropriate water amount.

Using Key Operation Controls

Start, Pause, and Resume Cycle

Explains how to start, pause, and resume the washing cycle using the button.

Power On;Off and Reservation Functions

Instructions for power control and using the reservation function with display.

Step-by-Step Operating Procedure

Power On and Program Selection

Steps to switch on power and select a wash program using buttons.

Selecting Procedures, Water Level, and Reservation

Guides on choosing processes, water level, and setting a delayed start time.

Finalizing Operation Steps

Steps for closing the lid and what happens upon cycle completion.

Program Selection and Water Level Details

Important Usage Attention Points

Notes on spinning without water, soak process for woolens, and colorfastness.

Procedure Program Selection Method

Details on selecting procedure programs by pushing the select button.

Selecting Suitable Water Level

Reiterates selecting water level based on load, referencing other pages.

Program Timings and Final Operations

Program Time List Overview

Table showing the duration for water level, wash, rinse, and spin for each program.

Reservation and Start;Pause Operations

Instructions on setting a reserved wash cycle and using the start/pause button.

Lid Closure and Cycle Completion

Guidance on closing the lid during operation and automatic power-off at cycle end.

Disposal and Cleaning After Washing

Cleaning the Lint Filter

Step-by-step guide for detaching, cleaning, and reassembling the lint filter.

Cleaning Filters and Cabinet Exterior

Advice on cleaning inlet valve filter and exterior cabinet with appropriate materials.

Post-Wash Machine Care

Steps for closing the tap, draining, unplugging, and airing the machine.

Troubleshooting Common Issues

Error Codes and Troubleshooting

Lists error codes (E0-E4) and their corresponding reasons and solutions.

Operational Problems and Solutions

Addresses common problems like slow drain, no spin, abnormal sounds, and leaks with solutions.

Common Phenomena and Packing List

Explanation of Common Phenomena

Explains intermittent spinning, spin function issues, and water flow during first use.

Included Washing Machine Components

Lists all items included in the washing machine package and their storage location.

Washing Machine Specifications

Model, Electrical, and Power Specs

Details the model number, voltage, frequency, and power ratings.

Capacity, Water Levels, and Pressure

Provides information on washing capacity, water levels, and inlet pressure.

Weight and Dimension Details

Lists the machine's weight and overall dimensions.

Haier XQB50-10 Specifications

General IconGeneral
BrandHaier
ModelXQB50-10
CategoryWasher
LanguageEnglish

Related product manuals