Why is there abnormal sound inside my Haier XQB60-C Washer?
If you hear abnormal sounds from your Haier Washer, it might be due to the machine not being level, foreign materials inside, or an unbalanced load. Make sure the machine is on an even surface, remove any foreign objects, and redistribute the laundry evenly before closing the lid.
What to do if the drainage cannot work or is too slow in my Haier XQB60-C Washer?
If the wash, rinse, spin, and jeans lights are flashing and your Haier Washer is draining slowly, the drain hose may be blocked. Clear any foreign material from the hose and press the start button again.
What to do if my Haier XQB60-C does not act?
If your Haier Washer isn't starting, first ensure it's receiving power by checking the power plug and inserting it tightly. Also, make sure the top lid is securely closed and that your clothes are arranged flat inside the machine. If the water level hasn't reached the preset position, allow the machine to fill to the appropriate level.
How to fix no water inlet in my Haier XQB60-C?
If your Haier Washer isn't filling with water, make sure the power plug is securely plugged in, the water faucet is fully opened, and that you've pressed both the POWER ON/OFF and START/PAUSE buttons.
What to do if the safety switch acts and the spinning cannot work in my Haier XQB60-C Washer?
If the safety switch is activated, the wash, spin, jeans, and speedy lights are flashing, and your Haier Washer won't spin, it could be due to an unbalanced load or the machine not being level. Reorder the laundries, close the top lid, and ensure the washing machine is set horizontally. Then, open and close the top lid once.
How to fix water faucet leaks water in my Haier XQB60-C?
If the water faucet is leaking on your Haier Washer, check the screw of the water inlet hose jointer. If it's loose or twisted, fasten it properly.
Identifies all components of the washing machine and its accessories.
Outlines essential safety guidelines and warnings for operating the washing machine.
Covers the installation of the lint filter, bottom plate, drain hose, and water inlet hose.
Guides on checking laundries, preparing them, and connecting the machine for washing.
Explains how to load laundries, considering capacity and type, with reference weights.
Details how to use washing powder, whitener, and provides a dosage table.
Explains button functions, programs, water levels, and step-by-step washing process.
Covers cleaning the lint filter and general post-wash procedures.
Lists common issues, their reasons, and solutions for the washing machine.
General| Rated voltage frequency | 220-240V ~ 50Hz |
|---|---|
| Rated washing power | 415W |
| Rated spinning power | 315W |
| Rated washing / spinning capacity | 6.0kg |
| Water level/Water quantity (about) | 50L/High, 42L/Middle, 34L/Low |
| Max water consumption | About 150L (the highest water level, normal program) |
| Water inlet pressure | 0.03MPa-0.78MPa |
Weight and Dimensions| Weight | About 33kg |
|---|---|
| Dimensions (mm) | L 540 W 540 H 875 |
To Next Page
