Haier YR-E16b - Parameter Settings - Heating Mode; Heating Mode EEV and Control Parameters

Page 34
ENGLISH
WIRED CONTROLLER
49-5000680 Rev. 0
Page Parameter
1
HEAT
MODE
EEV standard opening angle
when Thermo.on
EEV standard opening angle
when Thermo.o
EEV opening angle
during oil recovery
2
HEAT
MODE
EEV opening angle
during defrosting
Heating target temperature
Anti-cold air
3
HEAT
MODE
Remaing heat blowing interval
when Thermo.o
Auxiliary heater on temperature