Haier YR-E16b - Parameter Settings - Cooling Mode & Motion Sensing; Cooling Mode Parameters and Motion Sensing Setup

Page 35
ENGLISH
WIRED CONTROLLER
49-5000680 Rev. 0
Page Parameter
4
COOL
MODE
EEV standard opening angle
outdoor temperature higher than setting
temperature
EEV standard opening angle
outdoor temperature lower than setting
temperature
5
COOL
MODE
EEV minimum opening angle
when Thermo.on
EEV opening angle
during oil recovery when Thermo.o
6
COOL
MODE
EEV opening angle
during oil recovery when Thermo.on
Target overheat degree
7
COOL
MODE
Anti-freeze temperature point
Motion sensing
The function is available for some models. When motion sensing
follow or evade is set, the angle of the deector will be decided by
the person’s current location, the setting swing angle in the main
interface is invalid at this time. When the function of automatic
power o is set, indoor unit will power o after sensing nobody
in the room for the setting time. All the functions in the interface
are “OFF” by default.