Haiku K3150-S1 - Installing the Lower Cover; Installing Rubber Bumpers

HAIKU by Big Ass Fans
5
For Haiku, position the lower cover, and then place both hands flat on the cover and turn clockwise to lock
the lower cover into place.
Step 2. Installing the lower cover
With the fan still positioned upside-down on the work aid, remove the protective covering from the
bottom of the fan. With the fan still in the upside-down position, align the three tabs on the lower cover
with the three slots in the undersides of the airfoils and secure.
INSTALLATION CONT.
Haiku Bamboo
For Haiku Bamboo, simply snap the lower cover to the bottom of the fan hub.
Lower
Cover
Haiku
Step 3. Installing rubber bumpers
Slide the rubber bumpers on the extension tube brackets as shown on the right.
Rubber
bumper
Lower
Cover