Outlet Box
If your local electrical code requires the fan to be installed on a ceiling-mounted outlet box, the outlet box
must be suitable for fan support. If there is not an outlet box at the fan location, one should be installed on
a ceiling joist or beam and properly wired.
Concrete Ceiling
If installing your fan on a concrete ceiling, ensure
power wiring has been routed to the fan site. Attach
the mounting bracket directly to the ceiling using four
Ø 6 mm anchor bolts (not supplied). If required by
your local building and safety code, install an Ø 8 mm
anchor hook (not supplied) for the safety cable.
Wood Ceiling Joist
If installing your fan on a wood ceiling joist, ensure
power wiring has been routed to the fan site.
Attach the mounting bracket directly to the joist
using two wood screws (not supplied). Haiku Home
recommends using corrosion-resistant 12-11 x 45 mm
hex head timber screws with seal.
INSTALL THE MOUNTING BRACKET
3
Sloped Ceilings
If mounting to a sloped ceiling, install the mounting
bracket so that the open side faces upward with the
slope.
To Next Page
Loading...
