7
HAIKU® HOME
Make sure power is disconnected before wiring the fan!
If required by your local electrical code, a licensed electrician must install the fan.
Do not connect the fan to a damaged power source! Do not attempt to resolve electrical failures on
your own. Consult a qualified electrician if uncertain of the electrical installation of this fan.
Make the electrical connections by securing the supply power wires to the loose ends of the wiring
harness (a) with the provided wire nuts or a terminal strip (or the means of connection required by your
local electrical code).
Test the connection by lightly tugging on the wires.
Do not connect the green (Earth/Ground) wire on
the harness at this step!
Tuck the power wiring into the outlet box or building structure so that only the harness and the supply
Earth/Ground wire hang through.
AC HOT/L1
BROWN
AC NEUTRAL/L2
BLUE
PE/EARTH GROUND
GREEN
AUSTRALIA Brown or Red Black or Light Blue
Green with Yellow Tracer
ALL OTHER REGIONS Brown Blue
!
!
!
3
2
1
To Next Page
Loading...
