Haiku L3127-X5 - Align Cover and Receptacle; Secure Cover with Screws; Install Diffuser Ring

41
HAIKU® HOME
Slide the wiring cover (a) up the extension tube, aligning the yellow arrow stickers so that the top of
the wiring cover sits flush with the mounting bracket. Make sure the LED indicator receptacle shows
through the opening in the cover (b).
Make sure all wiring is tucked into the wiring cover, and then secure the cover with the provided
screws (c).
Wiring Cover Hardware:
c. (4) M4 socket head cap screws
Slide the LED diuser ring (d) up the extension tube and plug
the connector into the LED indicator receptacle through the
opening (b) in the wiring cover.
Make sure the tabs on the diuser ring are securely snapped
in place.
1
2
STEP COMPLETED
3